Busbars, Connectors & Insulators

Busbar 150A 4P & Cover 4X 1/4" TerminalsBusbars are used for high current distribution and at the same time they provide connections for batteries and/or DC equipment.We offer a number of busbars with different current ratings, and a different number of...

Dual PowerPost ConnectorsDesigned for outboard engine installation when factory cables need to be extendedIncludes one black and one red insulatorWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known...

2 x 5⁄16"- 18 Stud Terminal6 x#10-24 Terminal Screws Part# 2128 SpecificationsContinuous Amperage 250 Amperes AC/DCVoltage Rating 300 Volts AC Maximum / 48 Volts DC MaximumBus Material Tin-Plated Copper CDA 110 / UNS 11000Base Material Reinforced...

Pro Installer Link Bar 35.5 - 42.5mm *5-PackPro Installer link bars provide the fastest and most economical way of connecting the Pro Installer line of products to save space and allow for the most compact installations. The common interconnection height...

PowerPost High Amperage Cable Connector 1/4" StudFeatures:Connects high amperage cables securelyGlass-Reinforced Nylon48 Volts DC MaximumNot rated - Amperage flows between terminals stacked on post and is determined by wire and terminals usedWARNING:...

Dual Buss Bar with Cover - 12 TerminalsThis dual bus bar is designed for DC positive or negative distribution on one block or AC neutral and safety ground collection on one block. Constructed of corrosion-resistant tin-plated Copper and ABS with a...

Buss Bar with Cover - 6 TerminalsThis bus bar is designed for positive or negative DC distribution or collection of AC neutral or safety ground circuits. Constructed of corrosion-resistant tin-plated Copper and ABS with a polycarbonate cover...

Dual Distribution Stud Module - 2 x 3/8"The 702-2S was designed specifically for transom areas for connecting battery cables from outboards. It also has many other applications where heavy duty positive and negative connections need to be terminated...

Pro Installer Insulated Stud - Single - 10mmThe Pro Installer insulated studs are a smart choice for marine installers. An increased stainless steel stud length allows up to three cable lugs to be connected, saving space, while the snap-out side skirts...

Pro Installer Link Joiner 3-WayPro Installer link bars provide the fastest and most economical way of connecting the Pro Installer line of products to save space and allow for the most compact installations. The common interconnection height of Pro...

2512 Terminal Block 30AMP - 12 CircuitFeatures:Closed back design completely insulates power from the mounting surfaceEach screw pair is 1 isolated circuitJumpers allow creation of common circuitsWARNING: This product can expose you to chemicals...

9217 Terminal Block Jumpers for 2500 Series Blocks - Package of 5Features:Jumpers allow creation of common circuits on independent connectorsFits 30 Ampere terminal blocks (2500 Series)Bus Material: Nicke-Plated BrassWARNING: This product can expose you...

2708 BusBar Cover for PowerBar 2104Specifications:Dimensions: 8.500" x 3.375" x 2.750"WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or...

2506 Terminal Block 30AMP - 6 CircuitFeatures:Closed back design completely insulates power from the mounting surfaceEach screw pair is 1 isolated circuitJumpers allow creation of common circuitsWARNING: This product can expose you to chemicals including...

2103 PowerPost Plus Cable Connector 3/8" Stud Enables connection of multiple smaller wires in spaces where a traditional bus bar may not fit.Features:150 Ampere bus allows small wire connections at high amperage cable connectionsConnects high amperage...

2104 PowerBar 600AMP Cable Connector 4 x 3/8 16 Stud TerminalSpecifications:Max Voltage: 300 V AC/48 V DCNumber of Terminal Studs: 4Terminal Type: 3/8" - 16 StudWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp)...

2003 PowerPost High Amperage Cable Connector 3/8" StudInsulated single stainless steel stud terminates multiple large conductors.Features:Connects high amperage cables securelyStud dimensions: 3/8" x 7/8"Base Material is PBT UL94 V0WARNING: This product...

2002 PowerPost High Amperage Cable Connector 5/16" Stud Insulated single stainless steel stud terminates multiple large conductors.Features:Connects high amperage cables securelyStud dimensions: 5/16" x 7/8"Base Material is PBT UL94 V0WARNING: This...

2302 150AMP Common BusBar 20 x 8-32 Screw TerminalFeatures:The industry standard busbar for positive distributionThe industry standard busbar for the collection of negative or AC ground circuitsSpecifications:Max Voltage: 300 V AC48 V DCNumber of Screws:...

2105 MaxiBus 250AMP Common BusBars 12 x #10 Terminal ScrewsBusbars are used to consolidate multiple wires or feed multiple circuits.Features:Insert molded stainless steel studs eliminate need for securing nut and allow high torquing for excellent...

2303 150AMP Common BusBar 4 x 1/4" Stud TerminalFeatures:Stud design provides direct terminal to bus contact for low resistant connectionStainless steel studs allow high torquing for excellent electrical contactTin-plated copper bus for maximum...

2710 Cover for DualBus 2702Specifications:Length: 6-3/8"Height: 7/8"Width: 2-3/8"Weight: 0.04lbWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth...

2301 150AMP Common BusBar 10 x #8-32 Screw Terminal Features:Stud design provides direct terminal to bus contact for low resistant connectionStainless steel studs and screws allow high torquing for excellent electrical contactTin-plated copper bus for...

2709 Cover For DualBus for 2701Specifications:Length: 4-3/16"Height: 7/8"Width: 2-1/2"Weight: 0.03lbWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer,...

2305 MiniBus 100 Ampere Common BusBar 4 x 10-32 Stud TerminalFeatures:Great for limited space applications in electronics cabinets and under dashboardsWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is...

BB-2 Bus BarIdeal as a DC ground tie point or positive bus, this heavy-duty, 500-amp-rated bus bar assembly features 5/16 in. studs on 1 in. center in 1/4 in. thick copper bar for common connection or distribution of large wire gauges...

BB-2/8 Bus BarIdeal as a DC ground tie point or positive bus, this heavy-duty, 500-amp-rated bus bar assembly features 5/16 in. studs on 1 in. centers in 1/4 in. thick copper bar for common connection or distribution of large wire gauges...

BB-8 Bus BarIdeal as a DC ground tie point or positive bus, this heavy-duty, 500-amp-rated bus bar assembly features 5/16 in. studs on 1 in. center in 1/4 in. thick copper bar for common connection or distribution of large wire gauges...

2304 MiniBus 100 Ampere Common BusBar 5 x 8-32 Screw TerminalFeatures:Great for limited space applications in electronics cabinets and under dashboardsWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is...

2356100 - Water Resistant 100A Busbar with CoverWater-resistant bussing for harsh environments.  Built with wing screws for toolless access.Features:Accepts a wide range of wire sizesIncludes 3 wire plugs to maintain a water-resistant rating if less than...

Busbar to Connect 6 Modular HoldersFeatures:Six position high current bus bar (1500 A)With two M10 input connections.Input current up to 2000 A.Recommended to parallel multiple high power Multi or Quattro inverter/chargersWarranty InfoWARNING: This...

2356 Water Resistant BusBar - 100 Amp with CoverProvides secure water-resistant bussing for harsh environments. The single side nesting design allows for wire entry from one side to maximize space.Features:Water-resistant design with standard ring or...

8 Position Battery Terminal - POS/NEGThe VBTPN is an eight-position battery terminal that can accept up to (4) 4/8/10 AWG set screw outputs and (4) 1/0 to 10  AWG ring terminal outputs.  It includes (1) positive and (1) negative bolt-on posts for...

VFDB4 MANL 4 Position Distribution Block with CoverThis compact distribution block from T-Spec will handle the high-current power distribution for your single source to four (4) smaller gauge power wires, ensuring that your wiring's connected securely,...

VDB4 4-Position Distribution Block with CoverT-Spec designed their VDB4 distribution block to handle the high-current power distribution for four (4) power sources while keeping your wiring connected securely and looking neat.   You can also use this...

VDB2 2-Position Distribution Block with CoverT-Spec designed their VDB2 distribution block to handle the high-current power distribution for two (2) power sources while keeping your wiring connected securely and looking neat.   You can also use this...

VPNB2 MANL 2 Position All-In-One Distribution Block with CoverT-Spec designed VPNB2 distribution block to handle the high-current power and ground distribution for two (2) power sources, and protect them each with a mini-ANL fuse.  This hefty little...

2723 DualBus Plus 5/16" Stud - 5 x 10 - 32 Screw TerminalFeatures:Combines negative and positive buses on one blockClear polycarbonate cover snaps on to meet Coast Guard and ABYC insulation requirementsWARNING: This product can expose you to chemicals...

Cover for BusbarThe industry standard busbar for positive distributionThe industry standard busbar for the collection of negative or AC ground circuits WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is...

Busbar 150A 2P with 10 Screws & CoverBusbars are used for high current distribution and at the same time they provide connections for batteries and/or DC equipment.We offer a number of busbars with different current ratings, and a different number of...

Busbar 150A 2P with 20 Screws & CoverBusbars are used for high current distribution and at the same time they provide connections for batteries and/or DC equipment.We offer a number of busbars with different current ratings, and a different number of...

Busbar to Connect 5 Mega Fuse Holders Busbar Only Fuse Holders Sold SeparatelyPlease contact your dealer for any returns, repairs or support issues related to this product. Manufacturer : Victron Energy Manufacturer Part No : CIP100400060

Busbar 600A 4P & Cover 4X 3/8" Plus 4X M8 TerminalsBusbars are used for high current distribution and at the same time they provide connections for batteries and/or DC equipment.We offer a number of busbars with different current ratings, and a different...

Busbar 600A 8P & Cover 8X 3/8" Plus 8X M8 TerminalsBusbars are used for high current distribution and at the same time they provide connections for batteries and/or DC equipment.We offer a number of busbars with different current ratings, and a different...

Busbar 250A 2P with 12 Screws & CoverBusbars are used for high current distribution and at the same time they provide connections for batteries and/or DC equipment.We offer a number of busbars with different current ratings, and a different number of...

Busbar 250A 4P & Cover 4X 5/16" TerminalsBusbars are used for high current distribution and at the same time they provide connections for batteries and/or DC equipment.We offer a number of busbars with different current ratings, and a different number of...

Busbar 150A 6P & Cover 6X 1/4" TerminalsBusbars are used for high current distribution and at the same time they provide connections for batteries and/or DC equipment.We offer a number of busbars with different current ratings, and a different number of...

Busbar 250A 2P with 6 Screws & CoverBusbars are used for high current distribution and at the same time they provide connections for batteries and/or DC equipment.We offer a number of busbars with different current ratings, and a different number of...

MiniBus 100 Ampere Common BusBar 5 x 8-32 Screw Terminal with CoverPN:   2314Great for limited space applications in electronics cabinets and under dashboardsSnap on insulating cover attaches to studs and allows unobstructed wire accessRaised bus...

MiniBus 100 Ampere Common BusBar 4 x 10-32 Stud Terminal with CoverPN:  2315Great for limited space applications in electronics cabinets and under dashboardsSnap on insulating cover attaches to studs and allows unobstructed wire accessRaised bus provides...

150 Ampere Common Busbar 20 x 8-32 Screw Terminal with CoverPN:   2312Stud design provides direct terminal to bus contact for low resistant connectionStainless steel studs and screws allow high torquing for excellent electrical contactTin-plated copper...

2602 Terminal Block 65AMP - 2 CircuitFeatures:Closed back design completely insulates power from the mounting surfaceEach screw pair is 1 isolated circuitJumpers allow creation of common circuitsWARNING: This product can expose you to chemicals including...

2504 Terminal Block 30AMP - 4 CircuitFeatures:Closed back design completely insulates power from the mounting surfaceEach screw pair is 1 isolated circuitJumpers allow creation of common circuitsWARNING: This product can expose you to chemicals including...

2608 Terminal Block 65AMP - 8 CircuitFeatures:Closed back design completely insulates power from the mounting surfaceEach screw pair is 1 isolated circuitJumpers allow creation of common circuitsWARNING: This product can expose you to chemicals including...

2604 Terminal Block 65AMP - 4 CircuitFeatures:Closed back design completely insulates power from the mounting surfaceEach screw pair is 1 isolated circuitJumpers allow creation of common circuitsWARNING: This product can expose you to chemicals including...

2408 Terminal Block 20AMP - 8 CircuitFeatures:Closed back design completely insulates power from the mounting surfaceEach screw pair is 1 isolated circuitJumpers allow creation of common circuitsWARNING: This product can expose you to chemicals including...

2402 Terminal Black 20AMP - 2 CircuitFeatures:Closed back design completely insulates power from the mounting surfaceEach screw pair is 1 isolated circuitJumpers allow creation of common circuitsWARNING: This product can expose you to chemicals including...

2502 Terminal Block 30AMP - 2 CircuitFeatures:Closed back design completely insulates power from the mounting surfaceEach screw pair is 1 isolated circuitJumpers allow creation of common circuitWARNING: This product can expose you to chemicals including...

2011 PowerPost Mini High Amperage Cable Connector - 1/4" StudInsulated single stainless steel stud terminates multiple large conductors.Features:Connects high amperage cables securelyStud dimensions: 1/4" x 3/4"Base Material is PBT UL94 V0WARNING: This...

2102 PowerPost Plus Cable Connector - 5/16" StudEnables connection of multiple smaller wires in spaces where a traditional bus bar may not fit.Features:150 Ampere bus allows small wire connections at high amperage cable connectionsConnects high amperage...

2101 PowerPost Plus Cable Connector - 1/4" StudEnables connection of multiple smaller wires in spaces where a traditional bus bar may not fit.Features:150AMP bus allows small wire connections at high amperage cable connectionsConnects high amperage...

9218 Terminal Block Jumpers for 2400 Series Blocks - Package of 5Features:Jumpers allow creation of common circuits on independent connectorsFits 20 AMP terminal blocks (2400 Series)WARNING: This product can expose you to chemicals including...

2610 Terminal Block 65AMP - 10 CircuitFeatures:Closed back design completely insulates power from the mounting surfaceEach screw pair is 1 isolated circuitJumpers allow creation of common circuitsWARNING: This product can expose you to chemicals...

9216 Terminal Block Jumper for 2600 Series Blocks - Package of 5Features:Jumpers allow creation of common circuits on independent connectorsFits 65AMP terminal blocks (2600 Series)WARNING: This product can expose you to chemicals including...

PowerBar Dual BusBar - Two 3/8"-16 StudsProvides compact high-ampere busing with 3/8" terminal studsSpecifications:Maximum Amperage: 200AMaximum Voltage: 48V DCNumber of Terminal Studs: 2Terminal Type: 3/8"-16 StudBus Material: Tin-Plated Copper CDA...

ST CLB Circuit Breaker Block Jumper - Package of 5Specifications:5 per retail packageWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or...

2702 DualBus 100AMP Common BusBar 10 x 8-32 Screw TerminalFeatures:Combines negative and positive buses on one blockTin-Plated Copper CDA 110 / UNS 11000UL 94-V0 Rated, Glass Reinforced Thermoplastics#8-32 Screw10 per busMaximum Voltage: 300V AC / 48V...

2406 Terminal Block 20AMP - 6 CircuitFeatures:Closed back design completely insulates power from the mounting surfaceEach screw pair is 1 isolated circuitJumpers allow creation of common circuitsWARNING: This product can expose you to chemicals including...

2404 Terminal Black 20AMP - 4 CircuitFeatures:Closed back design completely insulates power from the mounting surfaceEach screw pair is 1 isolated circuitJumpers allow creation of common circuitsWARNING: This product can expose you to chemicals including...

Dual PowerPost ConnectorsDesigned for connecting high amp conductorsIncludes one black and one red insulatorWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause...

Dual PowerPost ConnectorsDesigned for connecting high amp conductorsIncludes one black and one red insulatorWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause...

RT Screw Terminal 12 Circuit Dual Lever Bus BarThis Egis bus bar seamlessly integrates with RT fuse blocks, can be used as a standalone ground bus, or can be assembled with an existing RT Series fuse block line. Also, this multi-level low-amp has...

XD Relay Cross-Over Bus BarThe XD Relay Cross-Over Bus Bar allows users to link together Egis XD Single, Dual, and Triple XD Relays to each other in multiple configurations and even to the Egis 8700 Mechanical Disconnect.  Linking relays together creates...

500A 4 Stud Buss barPro Installer buss bars are designed for flexibility and scalability. The snap-out side skirts allow for additional cable entry, and radius ends improve cable routing options. it is easy to link other Pro Installer products to the...

Busbar HD 5 Stud 650A MC5Pro Installer buss bars are designed for flexibility and scalability. The snap-out side skirts allow for additional cable entry, and radius ends improve cable routing options. it is easy to link other Pro Installer products to...

Bus Bar HD 3 Stud 650A MC5Pro Installer buss bars are designed for flexibility and scalability. The snap-out side skirts allow for additional cable entry, and radius ends improve cable routing options. it is easy to link other Pro Installer products to...

200A Z Bar 18 Way Bus BarThis patent-pending, space saving buss bar range is a completely new concept for marine cable termination. Offering almost unlimited installation flexibility, the high and low level bars can be bussed together with Z-Link or used...

200A Z Bar 10 Way Bus BarThis patent-pending, space saving bus bar range is a completely new concept for marine cable termination. Offering almost unlimited installation flexibility, the high and low level bars can be bussed together with Z-Link or used...

Busbar HD 8 Stud 650APro Installer buss bars are designed for flexibility and scalability. The snap-out side skirts allow for additional cable entry, and radius ends improve cable routing options. it is easy to link other Pro Installer products to the...

ATC Six Way Bus Bar with 5mm Input StudThe ATC Negative Bus uses the BEP Contour lock system to allow it to be joined to the ATC fuse holder. This keeps wiring tidy and conveniently located. Current Rating: 100Amps.WARNING: This product can expose you to...

Insulated Stud Single 8mmThe Pro Installer insulated studs are a smart choice for marine installers. An increased stainless steel stud length allows up to three cable lugs to be connected, saving space, while the snap-out side skirts allow for additional...

Insulated Distribution Stud, Single 1/4"Insulated Distribution Stud, Single 1/4" -Made with high temperature plastic basesStud covers push securely over the threaded stud covering to ABYC standardsDual studs ideal for +ve / -ve connections, branch...

Single 10mm Insulated Stud with Power Tap PlateThe Pro Installer insulated studs are a smart choice for marine installers. An increased stainless steel stud length allows up to three cable lugs to be connected, saving space, while the snap-out side...

10mm Double Instulated StudThe Pro Installer insulated studs are a smart choice for marine installers. An increased stainless steel stud length allows up to three cable lugs to be connected, saving space, while the snap-out side skirts allow for...

Insulated Distribution Stud, Dual 1/4" - (Black)Dual StudMade with high temperature plastic basesStud covers push securely over the threaded stud covering to ABYC standardsDual studs ideal for +ve / -ve connections, branch circuits, windlass or inverter...

Insulated Distribution Stud, Single 1/4"Insulated Distribution Stud, Single 1/4" -Made with high temperature plastic basesStud covers push securely over the threaded stud covering to ABYC standardsDual studs ideal for +ve / -ve connections, branch...

BEP Pro Installer Terminal Block - 6 Way - 30AThis terminal block is ideal for isolated connections up to 30A and suitable for connecting tails from AC and DC panels.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate...

Terminal Block 65AMP - 6 CircuitFeatures:Closed back design completely insulates power from the mounting surfaceEach screw pair is 1 isolated circuitJumpers allow creation of common circuitsWARNING: This product can expose you to chemicals including...

Terminal Feed Through ConnectorsEliminates chage and provides strain relief when passing high current through hulls, decks and bulkheads.Features:Perfect for passing high current cables through hulls, decks and bulkheadsLarge cables passed through holes...

Terminal Feed Through ConnectorsEliminates chage and provides strain relief when passing high current through hulls, decks and bulkheads.Features:Perfect for passing high current cables through hulls, decks and bulkheadsLarge cables passed through holes...

Terminal Feed Through ConnectorsEliminates chage and provides strain relief when passing high current through hulls, decks and bulkheads.Features:Perfect for passing high current cables through hulls, decks and bulkheadsLarge cables passed through holes...

2300 150AMP Common BusBar 10 x #8-32 Screw Terminal with CoverFeatures:Stud design provides direct terminal to bus contact for low resistant connectionStainless steel studs and screws allow high torquing for excellent electrical contactTin-plated copper...

2306 MiniBus 100AMP Common BusBar Grounding BusBar 6 x 8-32 Screw TerminalFeatures:Great for limited space applications in electronics cabinets and under dashboardsWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate...

Terminal Feed Through ConnectorsEliminates chage and provides strain relief when passing high current through hulls, decks and bulkheads.Features:Perfect for passing high current cables through hulls, decks and bulkheadsLarge cables passed through holes...

2107 PowerBar 600AMP Cable Connector - 8 x 3/8" 16 Stud TerminalSpecifications:Maximum Voltage: 300 V AC/48V DCNumber of Terminal Studs: 8Terminal Type: 3/8" - 16 StudWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate...

PowerPost High Amperage Cable Connector #10 StudFeatures: Insulated single stainless steel stud terminates multiple large conductorsConnects high amperage cables securelyStud dimensions: #10-32 x 5/8"Base Material is PBT UL94 V0WARNING: This product can...

2715 Cover for BusBar 2301 & 2303Features:Weight: 0.08lb (0.04 kg)WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive...

2722 DualBus Plus 1/4" Stud, 5 x 10-32 Screw TerminalFeatures:Combines negative and positive buses on one blockClear polycarbonate cover snaps on to meet Coast Guard and ABYC insulation requireWARNING: This product can expose you to chemicals including...

2151Features:New isolated stud design uses standard 5/16" hardware and permits stacking of terminals Compact, high-amp fuse-Appropriate for DC Main, inverter, windlass, and bow thruster circuit protection Provides high current protection in tight space...

5503Cover includedAccepts 5/16" (M8) ring terminalsFor use on systems up to 32 Volts DCSwing out design allows replacement of the fuse without removing fastenersStainless steel studs provide resistance to corrosion and high torquing for excellent...