Maxwell

Foot Switch & Cover - Stainless SteelMaxwell heavy-duty, weather resistant units have a UV stabilized water proof diaphragm and are supplied complete with mounting instructions and screws...

The RC6 utilizes 6mm/7mm (1/4") chain spliced to 12mm (1/2") three strand or 8-plait rope. Maximum Pull: 660lbs. Providing most of the features of the larger RC8, the RC6 has been designed with the...

Maximum Pull: 1320lbsThe larger RC8-8 can be used with 8mm (5/16") chain spliced to 14mm (9/16") three strand or 8-plait rope.The ingeniously designed rope/chain gypsy (chainwheel) is able to...

Anchor Rode - 15'-1/4" Chain to 150'-1/2" Nylon Brait15' of 1/4" HT spliced chain to 150' of 1/2" Nylon Brait rope Nylon Brait™ is an 8-strand nylon rope created through braid technology that yields...

Anchor Rode - 20'-5/16" Chain to 200'-5/8" Nylon Brait20' of 5/16" HT spliced chain to 200' of 5/8" Nylon Brait rope Nylon Brait™ is an 8-strand nylon rope created through braid technology that...

Anchor Rode - 15'-5/16" Chain to 150'-5/8" Nylon Brait15' of 5/16" HT spliced chain to 150' of 5/8" Nylon Brait ropeNylon Brait™ is an 8-strand nylon rope created through braid technology that yields...

Anchor Rode - 18'-5/16" Chain to 200'-5/8" Nylon Brait18' of 5/16" HT spliced chain to 200' of 5/8" Nylon Brait ropeNylon Brait™ is an 8-strand nylon rope created through braid technology that yields...

FOOTSWITCHMaxwell heavy-duty, weather resistant units have a UV stabilized water proof diaphragm and are supplied complete with mounting instructions and screws.Rated at 200 amps and suitable for 12V...

FOOTSWITCHMaxwell heavy-duty, weather resistant units have a UV stabilized water proof diaphragm and are supplied complete with mounting instructions and screws.Rated at 200 amps and suitable for 12V...

Windlass Clutch Retaining Clip - HalfSpare clutch half retaining clip for Maxwell 3500 VW, VWC and VWCLP windlasses Manufacturer : Maxwell Manufacturer Part No : 2311 UPC : 9414761002028

Pressure Arm Upper 8mm - 5/16" CWFeatures:Pressure Arm Upper8mm5/16" CW Manufacturer : Maxwell Manufacturer Part No : 5347 UPC : 9414761025058

Hinged Bow Roller - Size 2Suitable for rope and chain anchor rodes utilizing up to 13mm (1/2") chain.Size 2:L - 430mm (16-15/16")B - 160mm (5-5/16")H - 100mm (4")h - 190mm (7-1/2")C - 66mm (2-11/16")...

Fixed Bow Roller w/LoopMaxwell also featurs a Fixed Bow Roller with an Anchor Loop.Fixed with Loop:A - N/AB - 134mm (5-1/4")C - 75mm (3")D - N/AH - 65mm (2-9/16")H1 - 155mm (6-1/8")L - 460mm...

HRC 10-8 Horizontal Windlass 5/16" Chain, 5/8" Rope, 12V, with CapstanDesigned for boats up to 45 feet, the HRC10-8 Horizontal Series windlasses proudly follow in the highly successful footsteps of...

RC8-6 Vertical Windlass 1/4" Chain, Rope 1/2" 12vPackage IncludesWindlassOn/Off Breaker Panel Reversing SolenoidUp/down Panel SwitchEmergency crank / clutch release handleFeaturesSimple two piece...

RC12/10 12V WindlassThe RC12 fully automatic windlass series is designed to effortlessly retrieve and deploy 10mm (3/8") short link chain and 16mm (5/8") to 20mm (3/4") three strand or 8-Plait rope...

RC10 Automatic Rope/Chain WindlassDesigned for 3/8" chain and 5/8" rope combinationMaximum Pull: 1870lbs.Metric chain size: 10mmMotor Wattage: 1200W Innovative heavy duty stainless steel pressure...

RC10 Automatic Rope/Chain WindlassDesigned for 5/16" chain and 5/8" rope combination Maximum pull: 1540 lbsMetric Chain Size: 8mmMotor Wattage: 1000WInnovative heavy duty stainless steel pressure...

Replacement Stripper for RC6/RC8 WindlassWindlass Replacement Stripper Arm Assembly KitApplications: Maxwell RC6 and RC8 Windlass Manufacturer : Maxwell Manufacturer Part No : 7010 UPC :...

P10068 Motor - 12VPermanent magnet replacement windlass motorUsed in the Freedom 500, VC500, VW500 and the VWC500 windlassesThis product may not be returned to the original point of purchase. Please...

Bush 1/2" NylonFeatures:1/2" Nylon741 330B Manufacturer : Maxwell Manufacturer Part No : SP0622 UPC : 9414761068529

Freedom Shaft Service KitMaxwell shaft service kit for Maxwell Freedom series windlasses. Manufacturer : Maxwell Manufacturer Part No : P100087 UPC : 9414761033879

Seal Kit f/2200 & 3500 Series Windlass GearboxesKit includes:(2) 55 x 70 x 8 oil seal(2) 20 x 2 O-ring(1) Sight glass(1) O-ring ID 90mm section dia. 2mm(1) 25 x 47 x 7 oil seal Manufacturer :...

Plunger/Spring Kit - 2200-4500Maxwell Plunger/Spring Kit for VWX - 4 of each Manufacturer : Maxwell Manufacturer Part No : P101550 UPC : 9414761040266

Windlass Foot Switch Replacement Bezel Cover - BlackFeatures:Replacement for Maxwell P19001, P19007 and P19006 Windlass Foot SwitchesSize (Bezel): 4" diameter, BlackIncludes Required Fasteners ...

Reversing Solenoid Pack - 12VMaxwell Reversing Solenoid Pack 12V, replaces P19045. Manufacturer : Maxwell Manufacturer Part No : SP5104 UPC : 9414761131780

PM Solenoid Pack - 12VMaxwell's PM Solenoid Pack that is 12V.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns...

MAXWELL AA710WIRELESS, HAND HELD REMOTE WINDLASS CONTROLLER AND RODE COUNTERAll the features of the AA560 plus options to control a bow thruster or deck lights and anchor wash.High level wireless...

ANCHOR SWIVEL SHACKLESThe use of a swivel and joining shackles to join your anchor and rode will greatly improve anchor retrieval and help ensure that the rode lays neatly into your anchor locker...

ANCHOR SWIVEL SHACKLESThe use of a swivel and joining shackles to join your anchor and rode will greatly improve anchor retrieval and help ensure that the rode lays neatly into your anchor locker...

EMERGENCY CRANK HANDLE (RC8, RC10, RC12 SERIES)For use with RC8, RC10, RC12 & Freedom Series anchor winches. Constructed of light weight, durable injection-moulded plastic, these handles float if...

The all new compact HRC6 and HRC8 are Maxwell's horizontal versions of the latest innovative new vertical RC6 and RC8 automatic rope/chain windlasses. The new HRC6 and HRC8 are packed with original...

The all new compact HRC6 and HRC8 are Maxwell's horizontal versions of the latest innovative new vertical RC6 and RC8 automatic rope/chain windlasses. The new HRC6 and HRC8 are packed with original...

Motor 12V 1000W1000 Watt 12 Volt Series Wound Replacement Windlass MotorFeatures:1000 Watt 12 Volt Replacement Windlass MotorDesigned for Maxwell 800 / 1000 windlasses4 hole flange motor replaces the...

ANCHORMAX™ WindlassFeatures:Has an extremely high power to weight ratioompact, fully sealed gearbox is driven by a vertically mounted, permanent magnet motorIntrusion below decks is minimised making...

Up/Down Footswitch - Compact, BlackPart #: P104810Maxwell's compact up and down foot switches are now available in black and white versions. Operates via solenoids thus allowing smaller diameter...

Up/Down Footswitch - Compact, WhitePart #: P104809Maxwell's compact up and down foot switches are available in black and white versions. Operates via solenoids thus allowing smaller diameter wiring...

Up/Down Windlass Control Panel w/Push Button ON/OFF SwitchEasy to use, panel mounted Up/Down switch for remote windlass operation from the helm, flybridge or cockpit.Suitable for use with...

Pressure Arm Upgrade KitMade specifically for Maxwell's Freedom Series of Windlasses. Manufacturer : Maxwell Manufacturer Part No : P100019 UPC : 9414761033312

Rode CounterAuto Anchor 150 - panel mount rode counter for electric or hydraulic windlasses using all-chain or rope/chain rode. Rode length monitoring from the helm. Large LCD display with adjustable...

Motor Cima - 1200W - 12V - 4-Hole Flange12V1200W DC3500RPMIP66Diameter: 114 x 181mmThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with...