Hardware

12mm Bolt-Down Fairlead - SingleHarken Bolt-Down Fairleads are used on boats 6–15 m (20–50 ft) as shallow-angle line deflectors. These weight-saving fairleads are built of 6061-T6 Hard Lube-anodized aluminum for durability. Smooth surfaces and radiused...

Quick Cleat - 5/16" - WhiteThe Barton Marine Quick Cleat range is perfect for novices and seasoned mariners and takes the place of tying and releasing knots. Made of nylon reinforced composite and secures braided lines up to 5/16" (10 mm) with a working...

Shroud CleatFeatures:All stainless steel construction, compatible with you stainless steel riggingWill not corrodeEasily attached to 5/32" thru 3/8" diameter wire or rodIdeal for flag, radar reflector and steaming shape halyards with an eye for attaching...

High Load Eye 22mm BoreErgonomically designed to maximize the strength and efficiency of the eye. With HV500 hard anodizing and the profile of the curved surfaces, these have been developed to keep friction as low as possible. The range has amazing...

High Load Eye 16mm BoreErgonomically designed to maximize the strength and efficiency of the eye. With HV500 hard anodizing and the profile of the curved surfaces, these have been developed to keep friction as low as possible. The range has amazing...

Exit Plate/Flat for up to 3/4" LineSpecifications:Halyard Size 3/4" (19 mm)Mast Stat Opening 3-1/4"x 1" (83 mm x 25 mm)Fasteners (4), #10 RH (5 mm)Weight 1 oz. (28 g) Manufacturer : Schaefer Marine Manufacturer Part No : 34-48 UPC : 740507003929

Stanchion Base Single - Heavy-DutyRugged SS Base is canted 5 degrees inboard to match most deck cambers. Features a 5/16" (8mm) welded rod reinforcement which also serves as a bail for snatch blocks and other gear. Specifications:Length 5-1/8" (130...

Mid-Rail Chock/Cleat Stainless Steel - 1-1/4"Chock cleats will fit Schaefer T-Track measuring 1-1/4" wide, 7/16" overall height, 3/16" "T" thickness and a base width of 11/16". They will not fit earlier versions of T-Track or some competitors models...

Mid-Rail Chock/Cleat Stainless SteelSchaefer T-Track Chock cleats will fit Schaefer T-Track measuring 1" wide, 3/8" overall height, 1/8" "T" thickness and a base width of 1/2". They will not fit earlier versions of T-Track or some competitors models...

Stainless Steel Welded Pad Eye - 1-7/8"L x 5/8"WSpecifications:Eye Width 3/8" (10 mm)Eye Height 3/8" (10 mm)Eye Stock 3/16" (5 mm)Length 1-7/8" (48 mm)Width 5/8" (16 mm)Fasteners (2), #10 RH (5 mm)C/C 1-5/16" (33 mm)SWL 250 lbs (115 kg)Weight .5 oz. (14...

T-Track Endstop for 1-1/4" Track - Grey1 1/4" Grey Endstop   Manufacturer : Schaefer Marine Manufacturer Part No : 74-36-G UPC : 740507007279

Wire Fairlead with Base for 70-17 Cam CleatWire Cam Fairlead with Base. Works with 70-17 Cam cleat. Does NOT include 70-17 Cam Cleat Manufacturer : Schaefer Marine Manufacturer Part No : 77-18 UPC : 740507903854

Stainless Steel Welded Pad Eye - 3"L x 1"WSpecifications:Eye Width 7/8" (22 mm)Eye Height 7/8" (22 mm)Eye Stock 1/4" (6 mm)Length 3" (76 mm)Width 1" (25 mm)Fasteners (2), 1/4" RH (6 mm)C/C 2-3/16" (55 mm)SWL 2500 lbs. (1135 kg)Weight 3.25 oz. (92 g)  ...

T-Track Endstop for 1" Track - Black1" Black Endstop Manufacturer : Schaefer Marine Manufacturer Part No : 74-35 UPC : 740507007248

T-Track Endstop for 1-1/4" Track - Black1 1/4" Black Endstop   Manufacturer : Schaefer Marine Manufacturer Part No : 74-36 UPC : 740507007262

T-Track Endstop for 1" Track - Grey1" Grey Endstop Manufacturer : Schaefer Marine Manufacturer Part No : 74-35-G UPC : 740507007255

Stainless 1-1/4" T-Track Slider - Eye Slide/LinedSpecifications:Track Size 1-1/4" x 3/16" (32 mm x 5 mm)Max. Boat Length 38' (10 m)Max. Boat Weight 12000 lbs. (5455 kg)Max. Sail Area 520 sq. ft. (48 m2)Length 4" (102 mm)Width 1-11/16" (43 mm)Height...

Stainless Steel Welded Pad Eye - 2"L x 5/8"WSpecifications:Eye Width 1/2" (13 mm)Eye Height 1/2" (13 mm)Eye Stock 3/16" (5 mm)Length 2" (51 mm)Width 5/8" (16 mm)Fasteners (2), #10 RH (5 mm)C/C 1-7/16" (37 mm)SWL 650 lbs. (295 kg)Weight .5 oz. (14 g) ...

Stainless Steel Welded Pad Eye - 2-1/4"L x 5/8"WSpecifications:Eye Width 1/2" (13 mm)Eye Height 1/2" (13 mm)Eye Stock 1/4" (6 mm)Length 2-1/4" (57 mm)Width 5/8" (16 mm)Fasteners (2), #10 RH (5 mm)C/C 1-11/16" (42 mm)SWL 750 lbs. (350 kg)Weight 1.75 oz...

Removable Eye Deck Plate/AssemblySpecifications: Eye Width 5/8" (16 mm)Eye Height 5/8" (16 mm)Eye Stock 1/4" (6 mm)Length 3" (76 mm)Width 3" (76 mm)Fasteners (4), 1/4" FH (6 mm)C/C A 2" (51 mm)C/C B 2" (51 mm)SWL 2250 lbs. (1020 kg)Weight 9.5 oz. (269...

Investment Cast Pad Eye - 3" OD Base316 Stainless Steel includes delrin(tm) base. Order Backing Plate 97-54 separately. Specifications: Eye Width 1-1/8" (29 mm)Eye Height 7/8" (22 mm)Eye Stock 1/2" (13 mm)Length 3" (76 mm)Width 3" (76 mm)Fasteners (4),...

DO 550 Rope Clutch - Cam Replacement cam for any size Barton Marine DO 550 Rope Clutch.*Sold as an Individual Manufacturer : Barton Marine Manufacturer Part No : 81546 UPC : 5035088815463

DO 550 Rope Clutch - Handle Replacement handle for any size Barton Marine DO 550 Rope Clutch.*Sold as an Individual Manufacturer : Barton Marine Manufacturer Part No : 81545 UPC : 5035088815456

DO 550 Rope Clutch - Spring Assembly   Replacement spring assembly for any size Barton Marine DO 550 Rope Clutch.*Sold as an Individual Manufacturer : Barton Marine Manufacturer Part No : 81549 UPC : 5035088815494

DO 550 Rope Clutch - Base Plate Replacement base plate for any size Barton Marine DO 550 Rope Clutch.*Sold as an Individual Manufacturer : Barton Marine Manufacturer Part No : 81547 UPC : 5035088815470

Standard Cam-Matic® Aluminum CleatAluminum Cam-Matics® are hardcoat-anodized for high-load, high-wear, continuous adjustment applications. Specifications:Height: 30 mm / 1-3/16 inLength: 65 mm / 2-9/16 inWidth: 32 mm / 1-1/4 inWeight: 71 g / 2.5...

Boom Hanger - 80mm(3-1/8") Internal Width125mm(5") long x 80mm(3-1/8") wideMaterial Diameter: 7.9mm(5/16"). Fixing Holes Diameter: 2 x 8.1mm(5/16")Applications:Typically used on dinghies, catamarans and small keelboatsMaterials:Grade 316 stainless steel ...

Narrow Saddle - 11.4mm(7/16") ClearanceGrade 316 Stainless Steel 37.3mm(1-7/16") screw to screw length Manufacturer : Ronstan Manufacturer Part No : RF1058 UPC : 9316800013623

Micro Carbo-Cam Base with BullseyeMicro Carbo-Cam® with bullseye keeps line fair. Mounts on stainless steel base.Specifications:Height: 22mm / 7/8in.Weight: 50g / 1.75ozMinimum line: 3mm / 1/8inMaximum line: 6mm / 1/4inFastener spacing: 27mm /...

Micro Standard Carbo-Cam Base with BullseyeMicro Carbo-Cam® with bullseye keeps line fair. Mounts on stainless steel base.Specifications:Height: 33mm/1-5/16inWeight: 85g/3ozMinimum line: 3mm / 1/8inMaximum line: 10mm / 3/8inFastener spacing: 27mm /...

Standard Carbo-Cam® CleatHarken® ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Lightweight fiber-reinforced Carbo-Cams® for racing where weight is critical, or where adjustments are less frequent...

Standard Cam-Matic® Aluminum Kit with Wire FairleadWire fairleads maintain a low profile while holding the line close to the cleat. Kit includes hardcoat-anodized 150 aluminum Cam-Matic® and 298 wire fairlead.Specifications:Weight: 85g / 3 oz.Maximum...

Standard Carbo-Cam® Kit with Wire FairleadWire fairleads maintain a low profile while holding the line close to the cleat. Kit includes lightweight, fiber-reinforced 326 Carbo Cam and 298 wire fairlead.Specifications:Weight: 54g / 2 oz.Maximum working...

Micro Carbo-Cam Cleat Kit with Wire FairleadWire fairleads maintain a low profile while holding the line close to the cleat.Kit includes lightweight, fiber-reinforced 471 Carbo Cam, and 475 wire fairlead.Specifications:Weight: 26g / 0.9ozMaximum working...

Micro Cam-Matic Aluminum Cleat Kit with Wire FairleadWire fairleads maintain a low profile while holding the line close to the cleat. Kit includes 468 Cam-Matic® and 475 wire fairlead.Specifications:Weight: 33g / 1.2ozMaximum working load: 91kg / 200lb ...

Sailmaker Stainless Steel Thimble - 8mm(5/16") Cable DiameterUsed to create eyes in both rope and wire rope Manufacturer : Ronstan Manufacturer Part No : RF2184 UPC : 9316800037834

Drain Plug Only - Plastic NylonFeatures:Plug to suit RF294 & RF737Water tight sealRetaining legsUV Stabilized Nylon plug Manufacturer : Ronstan Manufacturer Part No : RF738 UPC : 9316800031252

Drain Plug & Housing - Coarse Thread - Black NylonFeatures:24mm(15/16") Hole DiameterWater tight sealRetaining legsUV Stabilized Nylon plug and housing Manufacturer : Ronstan Manufacturer Part No : RF294 UPC : 9316800041589

Series 30 High Load Exit Box for Single Rope or WirePlain bearing sheaves are ideal for halyards and other applications where high static loads are likely to be encounteredApplications:Ideal applications where lines (rope or wire) need to be led through...

Thimble for 6mm(1/4") WireGrade 304 Stainless Steel Manufacturer : Ronstan Manufacturer Part No : RF485 UPC : 9316800090587

Narrow Saddle - 10mm(13/32") ClearanceGrade 316 Stainless Steel28mm(1-1/8") screw to screw length Manufacturer : Ronstan Manufacturer Part No : RF498 UPC : 9316800104284

Series 40 High Load Exit Box for Single Rope or WirePlain bearing sheaves are ideal for halyards and other applications where high static loads are likely to be encounteredApplications:Ideal applications where lines (rope or wire) need to be led through...

Horn Cleat - Nylon - 76mm(3") LongFeatures:Rope Ø: 4mm(5/32")U.V. Satbilized Nylon Manufacturer : Ronstan Manufacturer Part No : RF520 UPC : 000676849026

Front Mounted Cleat Fairlead - Small - BlackEasily fitted to the small 'T-Cleat' and 'C-Cleat'. Allows precise cleating and release from any lead angle. Lower entry efforts for off-centre cleating. Will not catch lines or clothing.MaterialTough, abrasion...

C-Cleat Cam Cleat - Small - Black w/Black Base2-8mm(3/32" - 5/16") Rope DiameterIntensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in...

C-Cleat Cam Cleat - Medium - Grey w/Grey Base3-12mm(1/8" - 1/2") Rope DiameterIntensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in...

T-Cleat Cam Cleat - Small - Red w/Grey Base2-8mm(3/32" - 5/16") Rope DiameterIntensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in...

C-Cleat Cam Cleat - Large - Grey w/Grey Base6-16mm(1/4" - 5/8") Rope DiameterIntensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in...

C-Cleat Cam Cleat - Medium - Black w/Black Base3-12mm(1/8" - 1/2") Rope DiameterIntensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in...

V-Cleat Open - Small - 3-6mm(1/8" - 1/4") Rope DiameterV-Cleats are a simple solution to cleating lines under moderate loads.Features:Lightweight and corrosion proofGreater abrasion resistance than traditional plastic cleatsLow, snag free profileBase...

S-Hook - 9.5mm(3/8") DiameterS-hooks feature a closed eye and long return leg to ensure a positive attachment and avoid accidental release.Grade 316 stainless steel Manufacturer : Ronstan Manufacturer Part No : RF51 UPC : 9316800039739

V-Cleat Fairlead - Small - 3-6mm(1/8" - 1/4") Rope DiameterV-Cleats are a simple solution to cleating lines under moderate loads. Cut away in base of fairlead cleats can be used as a becket for a 2:1 purchase system.Features:Lightweight and corrosion...

V-Cleat Open - Medium - 4-8mm(3/16" - 5/16") Rope DiameterV-Cleats are a simple solution to cleating lines under moderate loads.Features:Lightweight and corrosion proofGreater abrasion resistance than traditional plastic cleatsLow, snag free profileBase...

Swivel Dead Eye & Cleat Fairlead - 3-12mm(1/8 - 1/2") RopeSwivel cleat bases permit easy cleating and releasing from any angle.Dead eyes contain stainless steel liners for low friction and long life. Cleating plates are heavy guage alloy for stiffness...

Fairlead - Stainless Steel Lined - 14mm(9/16") ID - BlackFairleads are a simple and economical means of containing, deflecting or correcting the lead angle of control lines. Stainless steel liners provide greater abrasion resistance.Features:Impact...

SkyLock 800The Barton SkyLock 800 features 316 stainless steel side plates, glass-reinforced nylon cover plates, and an internal self-locking aluminum cam to lift and lock loads securely using lines of 8 12mm.The clever design and construction of the...

SkyLock 400The Barton SkyLock is an integral part of the SkyDock lifting system. The clever design and positioning of the locking cams mean the control line will never slip even when accidentally released.Manufactured in our factory using 316 stainless...

Swivel Cleat Fairlead - 2-8mm(3/32-5/16") Rope DiameterSwivel cleat bases permit easy cleating and releasing from any angle.Dead eyes contain stainless steel liners for low friction and long life. Cleating plates are heavy guage alloy for stiffness and...

Ball Bearing Swivelling Cam Cleat BaseSwivel cleat bases permit easy cleating and releasing from any angle.Swivel cleat bases permit easy cleating and releasing from any angle. Height adjustable arm for optimum cleating angle. Twin ball bearing race...

Quick Link - 8mm(5/16") DiameterQuick Links have large openings and secure threaded locking sleavesGrade 316 Stainless Steel Manufacturer : Ronstan Manufacturer Part No : RF713 UPC : 9316800040797

Shock - 3/16" Line - 1/4" Webbing - Red - PairThe Sheaveless BlackThe obvious choice for those kitesurfers, paragliders, control line deflections and purchase systems that require a lightweight high load capacity block.Ultimate durabilityWith no moving...

Shock - 3/16" Line - 1/4" Webbing - Grey - PairThe Sheaveless BlackThe obvious choice for those kitesurfers, paragliders, control line deflections and purchase systems that require a lightweight high load capacity block.Ultimate durabilityWith no moving...

Shock - 3/8" Line - 3/8" Webbing - BlueThe Sheaveless BlackThe obvious choice for those kitesurfers, paragliders, control line deflections and purchase systems that require a lightweight high load capacity block.Ultimate durabilityWith no moving parts...

Low Friction Ring - 8mm HoleLow Friction rings can be used as a lightweight alternative to a block in some applications. They are best suited for systems requiring relatively small line deflection angles, or for high static loads. The design achieves a...

Low Friction Ring - 21mm HoleLow Friction rings can be used as a lightweight alternative to a block in some applications. They are best suited for systems requiring relatively small line deflection angles, or for high static loads. The design achieves a...

DO 550 Rope Clutch - DoubleThe Barton D0 550 clutch is designed for cruising and racing yachts. Manufactured from modern lightweight materials to withstand the harsh marine environment. Molded parts are from high-grade plastics that are strong, light,...

Triple DO 550 Rope ClutchModern, high-performance materials. Manufactured from modern lightweight materials, the DO 550 molded parts are from high-grade plastics that are strong, light, and impact-resistant. Cams and bases are from marine grade aluminum,...

'K" Cam MiniManufactured from Dupont Kevlar/Zytal, K Cams are available in 3 sizes to accept lines up to 14mm (9/16”) in diameter. This advanced material offers performance advantages over carbon fiber and conventional glass-reinforced resins.'K' cams...

High Load Eye 6mm BoreAvailable in six sizes. Manufactured in marine-grade aluminum with a hard anodized finish. These lightweight high-load eyes are suitable for a variety of uses on board, from lazy jacks, barber haulers, and ast base tidies to...

Size 7 70mm Plain Bearing Pulley Block Single SwivelThe size 7 Barton high-load cruising block range is engineered for superior strength and performance and offers both plain and ball-bearing sheave assemblies. The range features high-grade glass fiber...

Size 6 64mm Plain Bearing Pulley Single Block Fixed EyeThe Size 6 Barton blocks are designed as our high-load cruiser block range and are of rugged construction. It features high-grade injection molded side plates, with all load-carrying components from...

Size 5 54mm Plain Bearing Pulley Block Single Block SwivelThe Size 5 Barton range of blocks has a 54mm 2 1/8" sheave. They are rugged construction, featuring high-grade molded side plates that are through-bolted and riveted for added strength and...

Size 5 54mm Plain Bearing Pulley Block Reverse ShackleThe Size 5 Barton range of blocks has a 54mm 2 1/8" sheave. They are rugged construction, featuring high-grade molded side plates that are through-bolted and riveted for added strength and security...

Size 5 54mm Plain Bearing Pulley Block Single Block Fixed EyeThe Size 5 Barton range of blocks has a 54mm 2 1/8" sheave. They are a rugged construction, featuring high-grade molded side plates that are through-bolted and riveted for added strength and...

Size 4 58mm Plain Bearing Pulley Cheek BlockThe Size 4 Barton range of blocks has a 58mm (2 5/16″) sheave. They are of a rugged construction featuring high-grade molded side plates that are through-bolted and riveted for added strength and security. All...

Size 4 58mm Plain Bearing Pulley Upright BlockThe Size 4 Barton range of blocks has a 58mm (2 5/16″) sheave. They are of a rugged construction featuring high-grade molded side plates that are through-bolted and riveted for added strength and security...

Size 1 30mm Plain Bearing Pulley Block Double with SwivelThe Size 1 Plain Bearing Blocks have a 30mm (1 3/16") sheave. The range is designed with an internal steel frame for added strength and durability. Also available in ball bearing sheave options,...

Size 1 30mm Plain Bearing Pulley Block Single Fixed EyeThe Size 1 Plain Bearing Blocks have a 30mm (1 3/16") sheave. The range is designed with an internal steel frame for added strength and durability. Also available in ball bearing sheave options, the...

Opening Luff Rope PrefeederFeatures:Single-handed operation by pushing on the springEasy to install with a lashing or fixed to the forestayCan be installed below any headsail foil or headsail reefing configurationStainless steel forged...

Sail Slide - Internal Track - 22mm(7/8") Wide x 42mm(1-21/32") LongImpact Resistant, U.V. Stabilized NylonWhite Manufacturer : Ronstan Manufacturer Part No : PNP28T UPC : 9316800210787

Super Medium Bailer - Inside MountFlange Size: - 67 x 135mm (2-11/16 x 5-5/16")The ANDERSEN automatic bailers are available world wide and recognized by dinghy sailors as the most effective and reliable means of automatic bailing.ANDERSEN Bailers are...

Super Mini Bailer - Indside MountFlange Size: - 61 x 106mm (2-7/16 x 4-3/16")The ANDERSEN automatic bailers are available world wide and recognized by dinghy sailors as the most effective and reliable means of automatic bailing.ANDERSEN Bailers are made...

Mini Bailer - Outside MountFlange Size: - 56 x 92mm (2-1/4 x 3-5/8")The ANDERSEN automatic bailers are available world wide and recognized by dinghy sailors as the most effective and reliable means of automatic bailing.ANDERSEN Bailers are made of...

Large Bailer - Outside MountFlange Size: - 80 x 142mm (3-3/16 x 5-9/16")The ANDERSEN automatic bailers are available world wide and recognized by dinghy sailors as the most effective and reliable means of automatic bailing.ANDERSEN Bailers are made of...

Transom Bung & Socket Set - BlackThis screw-type drain bung and socket is still among the best available. They are supplied with a rubber ‘O’ ring for a watertight seal. Manufacturer : Barton Marine Manufacturer Part No : 42356 UPC : 5035088423569

Screw Inspection Cover - 6" (103mm) - WhiteThese covers are manufactured from high-impact polycarbonate and feature an easy start thread and a built-in ‘O’ ring seal. Manufacturer : Barton Marine Manufacturer Part No : 40040 UPC : 5035088400409

Hinged Mini Pad Eye - 3/16"This pad eye is a smaller version of our popular #48-580 pad eye. This unit is suitable for awnings and many other tie-down applications. The working load should not exceed 400 lbs. The material is all T-316 stainless. Fastens...

Size 3 45mm Plain Bearing Pulley Block Cheek BlockThe size 3 Barton plain bearing blocks have a 45mm (1 3/4" sheave size 3 block range that incorporates modern design with stainless steel frames and the latest advanced materials, using 30% fiber...

Quick Cleat - 1/4" - PairThe Barton Marine Quick Cleat range is perfect for novices and seasoned mariners and takes the place of tying and releasing knots. Made of nylon reinforced composite and secures braided lines up to 1/4" (6 mm) with a working load...

Quick Cleat - Stainless Steel - 3/8"The Barton Marine Quick Cleat range is perfect for novices and seasoned mariners and takes the place of tying and releasing knots.  The heavy-duty version is made of 316-grade Stainless Steel and is suited for marina...

Quick Cleat - On a Patch for Inflatables - 1/4"The Barton Marine Quick Cleat range is perfect for novices and seasoned mariners and takes the place of tying and releasing knots. The perfect solution for securing ropes onto inflatables, featuring a Quick...

2-3/8" Aluminum SheaveFeatures:Material: AluminumMax Line 5/8" (16 mm)Max Wire 3/16" (5 mm)Outside Diameter 2-3/8" (60 mm)Inside Diameter 1/2" (13 mm)Width 3/4" (19 mm) Manufacturer : Schaefer Marine Manufacturer Part No : 62-070-BW UPC : 740507005626

FRX6 Friction Ring - 7mm (9/32")Features:Efficient and lightFRX Wichard thimbles are efficient, light, and reliableVery strong and can be used for heavy loads and semi-static linesFRX thimbles are designed to make your lines run smoothly with minimum...

FRX15 Friction Ring - 15mm (19/32")Features:Efficient and lightFRX Wichard thimbles are efficient, light, and reliableVery strong and can be used for heavy loads and semi-static linesFRX thimbles are designed to make your lines run smoothly with minimum...

FRX20 Friction Ring - 20mm (25/32")Features:Efficient and lightFRX Wichard thimbles are efficient, light, and reliableVery strong and can be used for heavy loads and semi-static linesFRX thimbles are designed to make your lines run smoothly with minimum...

FRX10 Friction Ring - 10mm (25/64")Features:Efficient and lightFRX Wichard thimbles are efficient, light, and reliableVery strong and can be used for heavy loads and semi-static linesFRX thimbles are designed to make your lines run smoothly with minimum...

FRX25 Friction Ring - 25mm (63/64")Features:Efficient and lightFRX Wichard thimbles are efficient, light, and reliableVery strong and can be used for heavy loads and semi-static linesFRX thimbles are designed to make your lines run smoothly with minimum...

Opening Luff Rope PrefeederFeatures:Single handed operation by pushing on the springEasy to install with a lashing or fixed to the forestayCan be installed below any headsail foil or headsail reefing configurationStainless steel forged...

Swivel Cleat BaseSwivelling cleat unit, 15mm sheaves. Stainless steel arm, small C-Cleat™ & fairlead. Swivel cleat bases permit easy cleating and releasing from any angle.Line load should be limited to: MWL 125kg (275lb), BL 250kg (550lb). Ideal for...

58mm Diameter Ball Bearing Rope Sheave A replacement all-purpose rope sheave. Used throughout the complete Barton block range.  Molded from UV-resistant acetal resin, the Barton sheave is made to survive the harsh marine environment. The unique,...