Marine Products

Volvo Penta SX/DP-SM Complete Anode Kit - AluminumUsed on Volvo Penta SX and DP-SM outdrives.Performance Metals Navalloy® aluminum anodes are manufactured to the military specification MIL-DTL 24779 and are suitable for use in all water types- salt,...

Volvo Penta DPS-A/SX-A Complete Anode Kit - AluminumUsed on Volvo Penta DPS-A, DPS-B, SX-A, and FWD-B outdrives.Performance Metals Navalloy® aluminum anodes are manufactured to the military specification MIL-DTL 24779 and are suitable for use in all...

Soft Draw Latch - Latch Only/No Keeper Included - Black RubberThe soft body construction of these latches quiets vibration and provides satisfactory performance despite misalignment.Internally-mounted lever provides over-center action for mechanical...

Small Flexible T-Handle Draw Latch - Latch Only/No Keeper IncludedFeatures:Flexible one piece molded latchUV resistantAbsorbs and reduces vibrationMaterial: NylonMaterial: RubberFinish: NaturalColor/Appearance: BlackMounting Style: Front Mount ...

Side Pocket Anode - Aluminum Used on most Mercury Verado and Optimax, Mariner 35-300hp, and Force 90 and 120hp outboards.Performance Metals Navalloy® aluminum anodes are manufactured to the military specification MIL-DTL 24779 and are suitable for use in...

General Purpose Centrifugal PumpEnd Suction Centrifugal PumpThe Rule General Purpose Pump is designed for use as a washdown pump and/or to circulate water to your livewell tank(s). Heavy duty construction for use on commercial or pleasure boats. 1-1/2"...

Mercury Outboard Power Trim Anode - AluminumUsed on Mercury Verado and Optimax outboards. Also many smaller Mercury/Mariner outboards.Performance Metals Navalloy® aluminum anodes are manufactured to the military specification MIL-DTL 24779 and are...

Rule 3700Heavy duty construction for both commercial and pleasure boat use; known for trouble free operation and reliability. 1-1/2" (38mm) discharge outlet. 12 Volts DC unless noted.Features:Fully SubmersibleEasy clean snap lock strainerSilent and...

Suzuki 90-140HP Outboard Complete Anode Kit - AluminumComplete kit of anodes and hardware for Suzuki 90-140 hp outboards.Performance Metals Navalloy® aluminum anodes are manufactured to the military specification MIL-DTL 24779 and are suitable for use in...

Push Button Push-to-Close LatchFeatures:Material: PlasticColor/Appearance: BlackAccess Restriction: No RestrictionGrip Range: 22.300-23.100mm (0.88-0.91")Installation: Threaded body and nutPanel Thickness: 0.000-10.300mm (0.00-0.41")Style: Pull tab...

Compression Lever Latch - Flush - LockingFeatures:Material: Zinc AlloyFinish: Powder CoatColor/Appearance: BlackAccess Restriction: Key LockingSealed: NoGasketed: NoGrip Range: 1.000-24.000mm (0.04-0.94")Door Thickness Range: 5.000mm (0.20")Head Style:...

Mercury Verado 4 & Optimax Complete Anode Kit - AluminumComplete kit of anodes and hardware for Mercury Verado 4 and Optimax outboards.Performance Metals Navalloy® aluminum anodes are manufactured to the military specification MIL-DTL 24779 and are...

Mercury Verado 6 Complete Anode Kit - AluminumComplete kit of anodes and hardware for Mercury Verado 6 outboard.Performance Metals Navalloy® aluminum anodes are manufactured to the military specification MIL-DTL 24779 and are suitable for use in all...

Flat Trim Tab Anode - AluminumUsed on all large Mercury outboards, Mercruiser Alpha 1 Gen II, and Bravo outdrives.Performance Metals Navalloy® aluminum anodes are manufactured to the military specification MIL-DTL 24779 and are suitable for use in all...

Deluxe Megaphone with Siren - Red/Grey - 16WOur 16 watt deluxe megaphone features a built-in switch selectable electronic alarm siren, pistol grip, press to talk switch, volume control, and shoulder strap. It is weatherproof. It uses eight C-batteries,...

Flush Sliding Door Latch - Square - AluminumFeatures:Allows for 100 - 150mm (4”- 6”) more door travel than traditional sliding-door lock stylesSafety lock prevents the door from being locked from the inside. To activate: turn the key clockwise and...

Flexible Draw LatchFeatures:Material: RubberMaterial: Stainless SteelFinish: NaturalAccess Restriction: No RestrictionMounting Style: Front MountKeeper Style: ROperation: PullSeries: 080 SeriesLatch Assembled: Yes Manufacturer : Southco Manufacturer...

Rule 1500High pumping capacity and reliability at a lower cost. The Rule 1500 offers more pumping capacity and more exclusive design features than any comparable competitive pump. 1-1/8" (28.6mm) discharge outlet. 12 Volts DC unless noted.Features:Fully...

AISnode NMEA 2000 Boat AIS Class B ReceiverAISnode is the first AIS Receiver to be designed exclusively for NMEA 2000. With a single, integral 0.75m NMEA 2000 cable that takes power from the network and outputs the AIS data on to the network, the AISnode...

Chesapeake White SS 2" Trim Gauge f/Honda EnginesPerimeter-lighted White dial with stylish Blue and White graphics, polished stainless steel bezel, contoured White pointer and domed glass lens.2"- Hole Size: 2.0625" (53mm)For Engine Types:Honda...

ElectroScan Control Assembly - 12VThe ElectroScan control assembly for 12-volt systems operates the ElectroScan that can be used with both manual and electric toilets to treat waste. The ElectroScan system creates a natural disinfectant from salt water...

Rule 2000Engineered to commercial standards. The Rule 2000 is the best selling high capacity submersible bilge pump in the world. 1-1/8" (28.6mm) discharge outlet. 12 Volts DC unless noted.Features:Fully SubmersibleEasy clean triple stage snap lock...

Rule 1500High pumping capacity and reliability at a lower cost. The Rule 1500 offers more pumping capacity and more exclusive design features than any comparable competitive pump. 1-1/8" (28.6mm) discharge outlet. 12 Volts DC unless noted.Features:Fully...

1500 G.P.H. Automatic Bilge PumpHigh pumping capacity and reliability at a lower cost. The Rule 1500 offers more pumping capacity and more exclusive design features than any comparable competitive pump. 1-1/8" (28.6mm) discharge outlet. 12 Volts DC...

Transom Mount TransducerDual/HD Side Imaging Transom, 20/60/180 cable degree, 200/83/455/800 kHz with built-in temperature. 20' cable.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause...

Rule 2000Engineered to commercial standards. The Rule 2000 is the best selling high capacity submersible bilge pump in the world. 1-1/8" (28.6mm) discharge outlet. 12 Volts DC unless noted.Features:Fully SubmersibleEasy clean snap lock strainerSilent and...

Rule 2000Engineered to commercial standards. The Rule 2000 is the best selling high capacity submersible bilge pump in the world. 1-1/8" (28.6mm) discharge outlet. 12 Volts DC unless noted.Features:Computerized operation - no float switch requiredFully...

Rule In-Line Blower - 3" DuctingPart Number: 140Designed for efficient, high output operation, these blowers feature our exclusive front and rear shaft seals and corrosion resistant motor housings for long life. Compact and easily installed on any flat...

E90W to Axiom Pro 9 Adapter Plate to Existing Fixing HolesAxiom Pro 9 adapter plate for legacy E90W MFDsFixing holes: ExistingModel: Axiom Pro 9 (All variants) Manufacturer : Raymarine Manufacturer Part No : A80530

C120/E120 Classic to Axiom 12 Adapter Plate to Existing Fixing HolesAxiom 12 adapter plate for legacy C120 / E120 Classic MFDsFixing holes: ExistingModel: Axiom 12 (All variants) Manufacturer : Raymarine Manufacturer Part No : A80529 UPC : 723193821619

C12x/e12x to Axiom Adapter Plate to Existing Fixing HolesPowder coated black to match the Axiom, this adapter plate is designed to enable a simple and stylish installation of Axiom 12″ multifunction displays in place of a C12x/e12x Series Display. ...

A9X to Axiom 9 Adapter Plate to Existing Fixing HolesPowder coated black to match the Axiom, this adapter plate is designed to enable a simple and stylish installation of Axiom 9" multifunction displays in place of a A9x Series Display. Manufacturer :...

3-Way Panel Lighted SwitchControls any pump equipped with an automatic float switch. Toggle has three positions (automatic, off, or manual) and has a "fail safe" spring return to "off" from the "manual" position. Panel is black stainless steel and has...

Rule In-Line Blower - 4" DuctingPart Number: 240Designed for efficient, high output operation, these blowers feature our exclusive front and rear shaft seals and corrosion resistant motor housings for long life. Compact and easily installed on any flat...

Hi-Water Bilge AlarmThe High Water Bilge Alarm consists of a non-mercury float switch and an in-dash gauge that features both a visual and an audible 85 db alarm. This unit allows an unmanned com part ment to be constantly monitored. For additional...

ECO-SwitchThe Rule ECO-Switch is an ecologically sound automatic bilge pump control control switch. Featuring a non-mercury design, the pump operates with simple air pressure. As water rises in the bilge, air rises in the air tube that is attached to...

3-Way Lighted Rocker Panel SwitchControls any pump equipped with an automatic float switch. This unit features a black plastic panel. It has a built-in fuse holder and an internally lighted rocker switch with 3 positions (automatic, off, or manual) with...

2-13/16" Rudder/Trim Tab Anode - AluminumAluminum trim tab or rudder anode with 2 halves and stainless steel hardware. Nuts are pressed into the casting.Performance Metals Navalloy® aluminum anodes are manufactured to the military specification MIL-DTL...

Embossed 4-Piece Step Kit - Beach SandGreat for slippery trailer fenders, steps, and boat ladders  SeaDek Step Kits are made from 5mm thick PE/EVA blended foam material.  Each kit comes with four (4) pieces of soft yet durable, non-absorbent PE/EVA...

2-Way Waste Manifold 6' Cable 3/4" PortsThe 2-way manifold with Whale Intelligent Control built-in. The IC manifold can be used with a Whale Gulper pump to create a grey water disposal system. The manifold accepts two waste inputs and senses water...

Embossed 4-Piece Step Kit - Bahama Blue Great for slippery trailer fenders, steps, and boat ladders  SeaDek Step Kits are made from 5mm thick PE/EVA blended foam material.  Each kit comes with four (4) pieces of soft yet durable, non-absorbent PE/EVA...

1-1/2" Streamlined Shaft Anode - AluminumAluminum shaft anode with 2 halves and stainless steel hardware.Nuts are pressed into the casting and bolts are captured with plastic retaining washers for easy assembly.Performance Metals Navalloy® aluminum...

1-3/4" Streamlined Shaft Anode - AluminumAluminum shaft anode with 2 halves and stainless steel hardware.Nuts are pressed into the casting and bolts are captured with plastic retaining washers for easy assembly.Performance Metals Navalloy® aluminum...

2" Streamlined Shaft Anode - AluminumAluminum shaft anode with 2 halves and stainless steel hardware.Nuts are pressed into the casting and bolts are captured with plastic retaining washers for easy assembly.Performance Metals Navalloy® aluminum anodes...

1-7/8" Rudder/Trim Tab Anode - AluminumAluminum trim tab or rudder anode with 2 halves and stainless steel hardware. Nuts are pressed into the casting.Performance Metals Navalloy® aluminum anodes are manufactured to the military specification MIL-DTL...

Embossed 4-Piece Step Kit - CamelGreat for slippery trailer fenders, steps, and boat ladders  SeaDek Step Kits are made from 5mm thick PE/EVA blended foam material.  Each kit comes with four (4) pieces of soft yet durable, non-absorbent PE/EVA blended...

1-1/4" Streamlined Shaft Anode - AluminumAluminum shaft anode with 2 halves and stainless steel hardware.Nuts are pressed into the casting and bolts are captured with plastic retaining washers for easy assembly.Performance Metals Navalloy® aluminum...

Embossed 4-Piece Step Kit - Seafoam GreenGreat for slippery trailer fenders, steps, and boat ladders  SeaDek Step Kits are made from 5mm thick PE/EVA blended foam material.  Each kit comes with four (4) pieces of soft yet durable, non-absorbent PE/EVA...

Embossed 4-Piece Step Kit - Olive GreenGreat for slippery trailer fenders, steps, and boat ladders  SeaDek Step Kits are made from 5mm thick PE/EVA blended foam material.  Each kit comes with four (4) pieces of soft yet durable, non-absorbent PE/EVA...

Embossed 4-Piece Step Kit - Caribbean BlueGreat for slippery trailer fenders, steps, and boat ladders  SeaDek Step Kits are made from 5mm thick PE/EVA blended foam material.  Each kit comes with four (4) pieces of soft yet durable, non-absorbent PE/EVA...

Embossed 4-Piece Step Kit - MicaGreat for slippery trailer fenders, steps, and boat ladders  SeaDek Step Kits are made from 5mm thick PE/EVA blended foam material.  Each kit comes with four (4) pieces of soft yet durable, non-absorbent PE/EVA blended...

1" Streamlined Shaft Anode - AluminumAluminum shaft anode with 2 halves and stainless steel hardware.Nuts are pressed into the casting and bolts are captured with plastic retaining washers for easy assembly.Performance Metals Navalloy® aluminum anodes...

Mini Divers Anode - AluminumPerformance Metals Navalloy® aluminum anodes are manufactured to the military specification MIL-DTL 24779 and are suitable for use in all water types- salt, brackish, or fresh.The anode includes the exclusive, patented “red...

Divers Anode - AluminumPerformance Metals Navalloy® aluminum anodes are manufactured to the military specification MIL-DTL 24779 and are suitable for use in all water types- salt, brackish, or fresh.The anode includes the exclusive, patented “red spot”...

Replacement Stripper for RC6/RC8 WindlassWindlass Replacement Stripper Arm Assembly KitApplications: Maxwell RC6 and RC8 Windlass Manufacturer : Maxwell Manufacturer Part No : 7010 UPC : 9414761097765

Boater's Dream Hull Anode - AluminumPerformance Metals exclusive replacement for Diver's Anode. The anode has twice the surface area and protection and  2 1/2 times the life of a standard diver's anode.Performance Metals Navalloy® aluminum anodes are...

12-Pin To Dual 4-Pin Transducer Y-CableUse this adapter cable when connecting a compatible 12-pin transducer to a compatible 4-pin Garmin device.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer,...

8-Pin Transducer Extension Cable - 30'Connect your transducer to your sonar device with this 30'(9M) 8-pin extension cable.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or...

Yamaha Outboard Bracket Anode - AluminumUsed on Yamaha outboard 4 stroke models 300-425hp.Performance Metals Navalloy® aluminum anodes are manufactured to the military specification MIL-DTL 24779 and are suitable for use in all water types- salt,...

Yamaha Clamp Bracket Anode (8-250HP) - AluminumUsed on Yamaha 2 stroke: 40, 50hp (2001 and later) 4 stroke 20, 25, 30, 40, 50, 60hp (2001 and later)Performance Metals Navalloy® aluminum anodes are manufactured to the military specification MIL-DTL 24779...

Hull Anode - AluminumUsed as a transom anode on many yachts.Performance Metals Navalloy® aluminum anodes are manufactured to the military specification MIL-DTL 24779 and are suitable for use in all water types- salt, brackish, or fresh.The anode includes...

Trim Tab/Hull Anode - AluminumUsed as a trim tab anode and many other applications.Performance Metals Navalloy® aluminum anodes are manufactured to the military specification MIL-DTL 24779 and are suitable for use in all water types- salt, brackish, or...

HC2A Hull Anode - AluminumPerformance Metals Navalloy® aluminum anodes are manufactured to the military specification MIL-DTL 24779 and are suitable for use in all water types- salt, brackish, or fresh.The anode includes the exclusive, patented “red...

HC3A Hull Anode - AluminumPerformance Metals Navalloy® aluminum anodes are manufactured to the military specification MIL-DTL 24779 and are suitable for use in all water types- salt, brackish, or fresh.The anode includes the exclusive, patented “red...

HC5A Hull Anode - AluminumPerformance Metals Navalloy® aluminum anodes are manufactured to the military specification MIL-DTL 24779 and are suitable for use in all water types- salt, brackish, or fresh.The anode includes the exclusive, patented “red...

Pontoon PumpThe float pump, designed originally for pumping out seaplane pontoons, offers the standard features of a "Thirsty-Mate_" pump with the addition of a flexible foot and tapered collar that fits standard funnels in most pontoons. The foot is...

Force™ Freshwater Trolling Motor - 57"The Most Powerful and Most Efficient Trolling Motor Available.Features:Includes the power you need to counter winds and currents with the efficiency to fish all dayWireless chartplotter integration and built-in...

Force™ Freshwater Trolling Motor - 50"The Most Powerful and Most Efficient Trolling Motor Available.Features:Includes the power you need to counter winds and currents with the efficiency to fish all dayWireless chartplotter integration and built-in...

Trolling Motor MountEasily attach your compatible scanning transducer to the trolling motor of your boat. The low-profile design of the mount provides ultimate protection from underwater obstructions and easy mounting. WARNING: This product can expose...

Power/Data Cable - 4-PinUse this 6' power/data cable to power your compatible echoMAP. Includes NMEA 0183 inputs/outputs.Compatible Devices:echoMAP™ SeriesWARNING: This product can expose you to chemicals which are known to the State of California to...

Tilt/Swivel Quick-Release MountSecure your compatible echoMAP™ with this mount, which features tilt/swivel capabilities for optimum viewing. With the mount's quick cable disconnect feature, you can plug the necessary cords into the mount, allowing you to...

Protective Cover for echoMAP™ 9Xsv SeriesGarmin's protective cover fits your compatible echoMAP™, helping to keep it safe from the harsh marine environment when not in use.Compatible Devices:echoMAP™ 93svechoMAP™ 94svWARNING: This product can expose you...

Protective Cover for echoMAP™ 73dv & 7Xsv SeriesGarmin's protective cover fits your compatible echoMAP™, helping to keep it safe from the harsh marine environment when not in use.Compatible Devices:echoMAP™ 73dvechoMAP™ 73svechoMAP™ 74svWARNING: This...

Yamaha Transom Anode (40-100HP) - AluminumUsed on Yamaha 40-100hp outboards.Performance Metals Navalloy® aluminum anodes are manufactured to the military specification MIL-DTL 24779 and are suitable for use in all water types- salt, brackish, or fresh...

Yamaha Transom Anode (115-300HP) - AluminumUsed on Yamaha 115-300hp outboards.Performance Metals Navalloy® aluminum anodes are manufactured to the military specification MIL-DTL 24779 and are suitable for use in all water types- salt, brackish, or fresh...

Button Anode - AluminumUsed on Yamaha outboards: 40hp (1985-1987), 50hp (1984-1987), 70-90hp (1984-1987) Honda 40-90hpPerformance Metals Navalloy® aluminum anodes are manufactured to the military specification MIL-DTL 24779 and are suitable for use in...

Yamaha Trim Tab Anode (200-300HP) - AluminumUsed on Yamaha 250hp (1990 and later), 225hp (1994 and later), VMAX200-225 (1998-2001), 4 stroke 200hp and 225hp (2002 and later), 4 stroke 250hp (2005 and later), 4 stroke 300hp (2006 and later).Performance...

Bail Mount with Knobs for echoMAP™ SeriesSurface mount your echoMAP™ using our bail mount with knobs; the mount tilts for optimum viewing. With the mount's quick cable disconnect feature, you can plug the necessary cords into the mount, allowing you to...

Yamaha 80-100HP Complete Anode Kit - AluminumComplete kit of anodes and hardware for Yamaha 80-100 hp outboards.Performance Metals Navalloy® aluminum anodes are manufactured to the military specification MIL-DTL 24779 and are suitable for use in all...

1" NPT x 1-1/4" Bronze Full Flow Pipe to Hose Straight FittingFeatures:Full FlowMale NPT x Hose connectionC83600 BronzeSizes from 1/2" to 3"UL Listed 647BNote- C83600 bronze fittings are not in compliance with NSF-61 and therefore are not intended for...

3/4" NPT x 1" Bronze Full Flow Pipe to Hose Straight FittingFeatures:Full FlowMale NPT x Hose connectionC83600 BronzeSizes from 1/2" to 3"UL Listed 647BNote- C83600 bronze fittings are not in compliance with NSF-61 and therefore are not intended for use...

1" NPT x 1-1/8" Bronze Full Flow Pipe to Hose Straight FittingFeatures:Full FlowMale NPT x Hose connectionC83600 BronzeSizes from 1/2" to 3"UL Listed 647BNote- C83600 bronze fittings are not in compliance with NSF-61 and therefore are not intended for...

1/2" NPT x 3/4" Bronze Full Flow Pipe to Hose Straight FittingFeatures:Full FlowMale NPT x Hose connectionC83600 BronzeSizes from 1/2" to 3"UL Listed 647BNote- C83600 bronze fittings are not in compliance with NSF-61 and therefore are not intended for...

1-1/4" Bronze Flanged Full Flow SeacockFeatures:1-1/4" sizes and larger include one grease zerk fitting for lubrication (use only with the valve in the open position), and one drain plug. The zerk can also be used for draining.Tri-flange base and mount...

1-1/2" Bronze Flanged Full Flow SeacockFeatures:1-1/4" sizes and larger include one grease zerk fitting for lubrication (use only with the valve in the open position), and one drain plug. The zerk can also be used for draining.Tri-flange base and mount...

Backing Block for 1-1/4" & 1-1/2" SeacocksFeatures:Each size fits multiple seacock sizesPress threaded brass inserts into the hull side of the backing block into the holes that match the seacock flangeRigid 1/2" thickness provides secure installation but...

3/4" Bronze Flanged Full Flow SeacockFeatures:1-1/4" sizes and larger include one grease zerk fitting for lubrication (use only with the valve in the open position), and one drain plug. The zerk can also be used for draining.Tri-flange base and mount...

1" Bronze Flanged Full Flow SeacockFeatures:1-1/4" sizes and larger include one grease zerk fitting for lubrication (use only with the valve in the open position), and one drain plug. The zerk can also be used for draining.Tri-flange base and mount hole...

C-Light™ The LED C-Light™ is a manually activated steady-on personal distress light with dramatically improved operating life.This rugged little waterproof light has a 20 lumen LED that operates typically for 30 hours continuously.  The C-Light™ is...

C-Light™ H20 The water activated C-Light™ H2O from ACR is a feature rich personal distress light that combines intense LED technology with increased operating life to provide you with the ultimate steady-on distress light. This waterproof light is tiny,...

Hydraulic to BOLT Electric Conversion KitFeatures:Quick and easy conversion from standard Bennett hydraulic single actuator systems (A1101A & A1101ARC) using your existing wiring, rocker switch, and trim planesNo rewiring or drilling of new holes...

O-Ring & Cover for Waterfilter 1320Replacement lid (Cover) and O Ring kit for the VETUS FTR1320 series raw water strainer units.Fits all sizes from 38 to 51mm. Manufacturer : VETUS Manufacturer Part No : FTR13201 UPC : 8717372052279

Aqua Strobe LED - Neon YellowAqua Strobe LED is the perfect addition to all personal protective equipment.With simple, glove-friendly twist operation that prevents accidental activation, this single AA battery light is designed with the end user in mind...

Deadrise Angle Finder - Accuracy of ± 1/2°Accurate to 1/2 of 1°, this precision instrument, with strong ceramic magnet is designed for attachment to a carpenter's square or straight edge to overcome time consuming computation of angles.Features:Quickly...

C-Strobe™ The LED C-Strobe™ is a manually activated personal distress strobe light with a dramatically improved operating life.This waterproof light is tiny, yet rugged and features a 45 lumen LED that typically operates for 120 hours continuously.  The...

C-Strobe™ H20 The LED C-Strobe™ H2O is either a water or manually activated personal distress strobe light with a dramatically improved operating life.This waterproof light is tiny, yet rugged and features a 45 lumen LED that typically operates for 120...

GT51M-THP - Stainless Steel Thru-Hull Pair DownVü/SideVü 500 W (CHIRP 260/455 kHz) Traditional 600 W (Mid-band CHIRP 80-160 kHz) Transducers with Temp (12-Pin)This thru-hull transducer pair provides ultra-clear sonar pictures of objects, structure and...

V-RingV-Ring for BOW125D Manufacturer : VETUS Manufacturer Part No : BP170 UPC : 8717372018718

DownVü™/SideVü™ 12-Pin Transom Mount Transducer for GCV™ 10Get ultra-clear sonar pictures of objects, structure and fish that pass below and to the side of your boat with this 12-pin transducer.This 20' transducer cable with built-in fast response...

2" NPT x 2-1/4" Bronze Full Flow Pipe to Hose Straight FittingFeatures:Full FlowMale NPT x Hose connectionC83600 BronzeSizes from 1/2" to 3"UL Listed 647BNote- C83600 bronze fittings are not in compliance with NSF-61 and therefore are not intended for...