Sailing

Series 40 All Purpose Block - Triple - Swivel HeadFeatures:Exceptionally high working loadsLow maintenance, long service lifeSelf-lubricating sheaveSlotted pin shackle eliminates fouled linesTwo way head postSpare parts - RF41010 Replacement Becket Pin,...

Series 40 All Purpose Block - Fiddle - Becket - CleatFeatures:Exceptionally high working loadsLow maintenance, long service lifeSelf-lubricating sheaveCaptive Lock™ universal headSlotted pin shackle eliminates fouled linesSnap fit removable becket...

Series 40 Ball Bearing Orbit Block - Single - Becket - Cleat - Swivel HeadFeatures:Ultra LightweightLow friction 2-stage Orbital ball bearing systemHighest working load in its classLow profile and compactHigh performance cleatingLightweightKilogram for...

Series 40 Ball Bearing Block - Fiddle - Becket - CleatFeatures:Low friction Acetal or Torlon® bearing systemLightweightCheek cut-outs for easy bearing maintenanceCaptive Lock™ universal headSlotted pin shackle eliminates fouled linesSnap fit removable...

Series 40 Ball Bearing Orbit Block - CheekFeatures:Ultra LightweightLow friction 2-stage Orbital ball bearing systemHighest working load in its classLow profile and compactHigh performance cleatingBase suits curved mounting surfaceLow mounting points for...

Series 40 AP Sheave - Acetal Solid Bearing - 40mm(1-9/16")ODPrecision moulded Acetal sheaves running on Acetal or Torlon® ball bearings provide high performance & low friction.Acetal Sheaves:Choice of bearingsSolid bearing - high strength and durability,...

Sail Slide - Internal Track - 22mm(7/8") Wide x 42mm(1-21/32") LongImpact Resistant, U.V. Stabilized NylonWhite Manufacturer : Ronstan Manufacturer Part No : PNP28T UPC : 9316800210787

28 ST FS - 2-Speed Self-Tailing Manual Winch - Full Stainless SteelIf you take pride in having your yacht look its best, ANDERSEN's Full Stainless Self-Tailing Winch creates the dock-stopping appeal you desire. It combines all the convenience and power...

Super Medium Bailer - Inside MountFlange Size: - 67 x 135mm (2-11/16 x 5-5/16")The ANDERSEN automatic bailers are available world wide and recognized by dinghy sailors as the most effective and reliable means of automatic bailing.ANDERSEN Bailers are...

Super Mini Bailer - Indside MountFlange Size: - 61 x 106mm (2-7/16 x 4-3/16")The ANDERSEN automatic bailers are available world wide and recognized by dinghy sailors as the most effective and reliable means of automatic bailing.ANDERSEN Bailers are made...

40 ST FS - 2-Speed Self-Tailing Manual Winch - Full Stainless SteelIf you take pride in having your yacht look its best, ANDERSEN's Full Stainless Self-Tailing Winch creates the dock-stopping appeal you desire. It combines all the convenience and power...

Mini Bailer - Outside MountFlange Size: - 56 x 92mm (2-1/4 x 3-5/8")The ANDERSEN automatic bailers are available world wide and recognized by dinghy sailors as the most effective and reliable means of automatic bailing.ANDERSEN Bailers are made of...

40 ST FS - 2-Speed Self-Tailing Manual Winch - Full Stainless SteelIf you take pride in having your yacht look its best, ANDERSEN's Full Stainless Self-Tailing Winch creates the dock-stopping appeal you desire. It combines all the convenience and power...

Large Bailer - Outside MountFlange Size: - 80 x 142mm (3-3/16 x 5-9/16")The ANDERSEN automatic bailers are available world wide and recognized by dinghy sailors as the most effective and reliable means of automatic bailing.ANDERSEN Bailers are made of...

Over Center Gate Hook with Splice Eye*Dyneema Line not included with fittingsC. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fittings. The Splice Line fittings are designed to be...

Tubular Turnbuckle with Splice Eye*Dyneema Line not included with fittingsC. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fittings. The Splice Line fittings are designed to be light...

Splice Eye with Threaded Stud: 1/4"-28 x 2-1/2" RH with Splice EyeIncludes cross-hole for cotter pin*Dyneema Line not included with fittingsC. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life...

Splice Eye with Threaded Stud: 1/4"-28 x 2-1/2" LH with Splice EyeIncludes cross-hole for cotter pin*Dyneema Line not included with fittingsC. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life...

Splice Eye with Threaded Stud: 5/16"-24 x 2-1/2" LH with Splice EyeIncludes cross-hole for cotter pin*Dyneema Line not included with fittingsC. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life...

Open Body Turnbuckle with Splice Eye*Dyneema Line not included with fittingsC. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fittings. The Splice Line fittings are designed to be light...

Deck Terminal with Splice Eye*Dyneema Line not included with fittingsC. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fittings. The Splice Line fittings are designed to be light weight...

Mini Gate Hook with Splice Eye*Dyneema Line not included with fittingsC. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fittings. The Splice Line fittings are designed to be light...

Gate Eye to Splice Eye Fitting*Dyneema Line not included with fittingsC. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fittings. The Splice Line fittings are designed to be light...

Splice Eye to Splice Eye Fitting*Dyneema Line not included with fittingsC. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fittings. The Splice Line fittings are designed to be light...

Snap Gate Hook - Body Only - 5/16" - 24 Right HandFor those that wish to replace their existing hooks- just match up the thread size. 3-1/2" long from end of body to inside bearing point of hook. Specifications:5-16"-24 RH Manufacturer : C. Sherman...

Snap Gate Hook - Body Only - 5/16" - 24 Left HandFor those that wish to replace their existing hooks- just match up the thread size. 3-1/2" long from end of body to inside bearing point of hook. Specifications:5-16"-24 LH Manufacturer : C. Sherman...

Splice Line Gate Kit - Aft for One SideC. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fittings. The Splice Line fittings are designed to be light weight and easy on the line. Both US...

Splice Line Gate Kit - Midship for One SideC. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fittings. The Splice Line fittings are designed to be light weight and easy on the line...

Over Center Snap Gate Hook for 1/8" WireThe over center design has no load on the swinging hook when closed. This feature allows easy opening, yet stays secure with a heavy split ring on the plunger latching devise. Investment Cast T-316 Stainless...

Splice Eye with Threaded Stud: 5/16"-24 x 2-1/2" RH with Splice EyeIncludes cross-hole for cotter pin*Dyneema Line not included with fittingsC. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life...

Splice Line Large Boat Kit for Boats up to 40'C. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fittings. The Splice Line fittings are designed to be light weight and easy on the line...

Splice Line Small Boat Kit for Boats up to 30'C. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fittings. The Splice Line fittings are designed to be light weight and easy on the line...

EP 3250 Full Finger Gloves - Grey/Black - LargeThese full-finger gloves protect against abrasion and provide a durable grip in wet conditions. The molded 3mm neoprene on the back of the hand keeps the warmth in and the water out, while synthetic leather...

Single Threaded Gate Eye for 1/8" WireA single eye is used on one end of the gate area and threaded into eye nut. Manufacturer : C. Sherman Johnson Manufacturer Part No : 26-407 UPC : 762799264079

Deck Toggle Turnbuckle to Hand Crimp Terminal for 3/16" WireThis "T" bolt style fitting is used on decks or bulkheads. T-316 stainlessSpecifications:3/16" Wire1/4"-283" adj. Manufacturer : C. Sherman Johnson Manufacturer Part No : 27-412-1T

Deck Toggle Turnbuckle to Hand Crimp Terminal for 1/8" WireThis "T" bolt style fitting is used on decks or bulkheads. T-316 stainlessSpecifications:1/8" Wire1/4"-283" adj. Manufacturer : C. Sherman Johnson Manufacturer Part No : 26-412-1T

Single Swivel Gate Eye for 3/16" WireA single eye is used on one end of the gate area to attach the gate hook. Manufacturer : C. Sherman Johnson Manufacturer Part No : 27-409 UPC : 762799274092

Single Swivel Gate Eye for 1/8" WireA single eye is used on one end of the gate area to attach the gate hook. Manufacturer : C. Sherman Johnson Manufacturer Part No : 26-409

Open Body Jaw to Swage Turnbuckle for 1/8" WireClassic, traditional design. Forged silicon bronze body with T-316 stainless ends.Specifications:1/8" Wire1/4" Pin3" adj. Manufacturer : C. Sherman Johnson Manufacturer Part No : 26-314 UPC : 762799263140

Open Body Jaw to Swage Turnbuckle for 3/16" WireClassic, traditional design. Forged silicon bronze body with T-316 stainless ends.Specifications:3/16" Wire1/4" Pin3" adj. Manufacturer : C. Sherman Johnson Manufacturer Part No : 27-316 UPC :...

Closed Body Jaw to Swage Tubular Turnbuckle for 3/16" WireJaw to swage- Check Nut Locking.Specifications:3/16" Wire1/4" Pin3" adj. Manufacturer : C. Sherman Johnson Manufacturer Part No : 27-412 UPC : 762799274122

Closed Body Jaw to Swage Tubular Turnbuckle for 1/8" WireJaw to swage- Check Nut Locking.Specifications:1/8" Wire1/4" Pin3" adj. Manufacturer : C. Sherman Johnson Manufacturer Part No : 26-412

Snap Gate Hook - Body Only - 1/4" - 28 Left HandFor those that wish to replace their existing hooks- just match up the thread size. 3-1/2" long from end of body to inside bearing point of hook. Specifications:1/4"-28 LH Manufacturer : C. Sherman Johnson...

"T" Style Toggle Jaw for 1/8" WireGenerally used at the stern rail when no gate is required with a turnbuckle forward. Manufacturer : C. Sherman Johnson Manufacturer Part No : 26-415

Deck Toggle "T" Style for 3/16" WireThis fitting can be used wherever a cable needs to be terminated to a deck or bulkhead. Manufacturer : C. Sherman Johnson Manufacturer Part No : 27-415-1T

Short Adjuster for 1/8" WireGenerally used at the stern rail in conjunction with the single gate eye to tension that section of the gate.Specifications:1/8" Wire1/4" Pin1" adj. Manufacturer : C. Sherman Johnson Manufacturer Part No : 26-406 UPC :...

"T" Style Toggle Jaw for 3/16" WireGenerally used at the stern rail when no gate is required with a turnbuckle forward. Manufacturer : C. Sherman Johnson Manufacturer Part No : 27-415

Double Threaded Interlocking Gate Eye for 1/8" WireA single eye is used on one end of the gate area and threaded into eye nut. Manufacturer : C. Sherman Johnson Manufacturer Part No : 26-408 UPC : 762799264086

Interlocking Swivel Gate Eye for 3/16" WireAn interlocking gate eye is used at the opposite end of the gate hook as a "hinge" for the gate. Manufacturer : C. Sherman Johnson Manufacturer Part No : 27-410 UPC : 762799274108

Deck Toggle "T" Style for 1/8" WireThis fitting can be used wherever a cable needs to be terminated to a deck or bulkhead. Manufacturer : C. Sherman Johnson Manufacturer Part No : 26-415-1T

Double Threaded Interlocking Gate Eye for 3/16" WireA single eye is used on one end of the gate area and threaded into eye nut. Manufacturer : C. Sherman Johnson Manufacturer Part No : 27-408 UPC : 762799274085

57mm Triple Carbo Block - Swivel, Becket, Cam CleatCarbo Ratchets allow sailors to hand-hold loaded lines and offer a balance between holding power and controlled easing.Features:Sheave Ø (mm) 57 mmSheave Ø (in) 2 1/4 inMaximum line Ø (mm) 10 mmMaximum...

Interlocking Swivel Gate Eye for 1/8" WireAn interlocking gate eye is used at the opposite end of the gate hook as a "hinge" for the gate. Manufacturer : C. Sherman Johnson Manufacturer Part No : 26-410 UPC : 762799264109

Single Threaded Gate Eye for 3/16" WireA single eye is used on one end of the gate area and threaded into eye nut. Manufacturer : C. Sherman Johnson Manufacturer Part No : 27-407 UPC : 762799274078

Spreader Flag Halyard KitIncludes 40ft. of polyester line, block with bail and shroud cleat. Manufacturer : C. Sherman Johnson Manufacturer Part No : 40-530 UPC : 762799405304

Eye to Deck Toggle FittingThis fitting can be mounted to any flat surface and accept life line fittings, line, etc. Toggling action is 140 degrees.  Manufacturer : C. Sherman Johnson Manufacturer Part No : LS-2550

Pulpit Anchor for 1" RailThis fitting can be used on the stern rail and bow pulpit to terminate jaw fittings for lower or upper life lines. (1/2" hole). The hole will not accept cast gate hooks.  Manufacturer : C. Sherman Johnson Manufacturer Part No ...

Eye to Jaw FittingThis fitting will convert a small bail at the stern rail to the standard gate eye to accept the over center gate hook. Manufacturer : C. Sherman Johnson Manufacturer Part No : LS-2500

Eye to Eye Adjustable FittingThis fitting can be used wherever an eye is required on each side of the stanchion. Adjustable between 3/4" and 1".  Manufacturer : C. Sherman Johnson Manufacturer Part No : 22-100

Handy Lock Turnbuckle Jaw/JawThe 01 Series Handy Lock turnbuckle is one of our oldest products and still stands the test of time. Neat and compact and positively locked without cotter pins or check nuts, the Handy Lock has all the features needed for...

Quick Release Shroud Adjuster - 1/4" PinDeveloped for dry-sailed one-design dinghies. When the quick-release pin is pulled, easy adjustment can be obtained. 1/4″ pin.Specifications:Pin-to-pin adjustment: 1-3/4″ to 3-5/8″Safe working load: 400 lbs. ...

Carbon Fiber Tiller Extension - 1MFeatures the latest in uni-directional 16mm carbon fiber tube which incorporates an additional pull wound spiral layer for optimum strength, making it stronger than conventional carbon fiber tube, and with our...

Alu Foam Soft Grip Tiller Extension - 900mmThe aluminum Soft Grip Tiller Extension is a specially designed textured grip for secure handling and comfort during prolonged use.Features:Manufactured from anodized aluminumSoft butt-end option Manufacturer :...

Alu Foam Soft Grip Tiller Extension - 800mmThe aluminum Soft Grip Tiller Extension is a specially designed textured grip for secure handling and comfort during prolonged use.Features:Manufactured from anodized aluminumSoft butt-end option Manufacturer :...

Alu Foam Soft Grip Tiller Extension - 700mmThe aluminum Soft Grip Tiller Extension is a specially designed textured grip for secure handling and comfort during prolonged use.Features:Manufactured from anodized aluminumSoft butt-end option Manufacturer :...

Transom Bung & Socket Set - BlackThis screw-type drain bung and socket is still among the best available. They are supplied with a rubber ‘O’ ring for a watertight seal. Manufacturer : Barton Marine Manufacturer Part No : 42356 UPC : 5035088423569

Screw Inspection Cover - 6" (103mm) - WhiteThese covers are manufactured from high-impact polycarbonate and feature an easy start thread and a built-in ‘O’ ring seal. Manufacturer : Barton Marine Manufacturer Part No : 40040 UPC : 5035088400409

Size 5 54mm Plain Bearing Pulley Block Single Double TangThe Size 5 Barton range of blocks has a 54mm 2 1/8" sheave. They are a rugged construction, featuring high-grade molded side plates that are through-bolted and riveted for added strength and...

Quick Release Lever - 5/16" PinThe Johnson Hyfield-type lever has several very practical features that have been developed after extensive testing on both high-performance multi-hulls and monohulls. The fitting is rugged, having an ultimate strength of...

Quick Release Lever - 1/4" PinThe Johnson Hyfield-type lever has several very practical features that have been developed after extensive testing on both high-performance multi-hulls and monohulls. The fitting is rugged, having an ultimate strength of...

Double Jaw Rigging Toggle - 3/8" PinLike our normal rigging toggles, these are designed to facilitate toggling action when used with marine eyes and mechanical fittings. All sizes include pins. Please see the attached charts for the exact dimensions...

Double Jaw Rigging Toggle - 5/16" PinLike our normal rigging toggles, these are designed to facilitate toggling action when used with marine eyes and mechanical fittings. All sizes include pins. Please see the attached charts for the exact dimensions...

Double Jaw Rigging Toggle - 1/4" PinLike our normal rigging toggles, these are designed to facilitate toggling action when used with marine eyes and mechanical fittings. All sizes include pins. Please see the attached charts for the exact dimensions...

Rigging Toggle - 3/8" PinThese stainless steel rigging toggles are essential to prevent the misalignment of rigid jaw turnbuckles. They are also used as a simple way to save rigging that was made too short. Ultimate strength exceeds the corresponding...

Rigging Toggle - 5/16" PinThese stainless steel rigging toggles are essential to prevent the misalignment of rigid jaw turnbuckles. They are also used as a simple way to save rigging that was made too short. Ultimate strength exceeds the corresponding...

Rigging Toggle - 1/4" PinThese stainless steel rigging toggles are essential to prevent the misalignment of rigid jaw turnbuckles. They are also used as a simple way to save rigging that was made too short. Ultimate strength exceeds the corresponding...

Hinged Mini Pad Eye - 3/16"This pad eye is a smaller version of our popular #48-580 pad eye. This unit is suitable for awnings and many other tie-down applications. The working load should not exceed 400 lbs. The material is all T-316 stainless. Fastens...

Size 3 45mm Plain Bearing Pulley Block Double with SwivelThe size 3 Barton plain bearing blocks have a 45mm (1 3/4" sheave size 3 block range that incorporates modern design with stainless steel frames and the latest advanced materials, using 30%...

Size 3 45mm Plain Bearing Pulley Block Single With Fixed EyeThe size 3 Barton plain bearing blocks have a 45mm (1 3/4" sheave size 3 block range that incorporates modern design with stainless steel frames and the latest advanced materials, using 30%...

Size 0 20mm Plain Bearing Pulley Block Double Fixed EyeThe Barton Size 0 Plain bearing block has 20mm (3/4″) sheaves and is also available in ball bearing sheaves. They are designed for high strength and performance but lightweight with the range...

Size 0 20mm Plain Bearing Pulley Block Single Swivel & BecketThe Barton Size 0 Plain bearing block has 20mm (3/4″) sheaves and is also available in ball bearing sheaves. They are designed for high strength and performance but lightweight with the range...

Size 0 20mm Plain Bearing Pulley Block Single Swivel without ShackleThe Barton Size 0 Plain bearing block has 20mm (3/4″) sheaves and is also available in ball bearing sheaves. They are designed for high strength and performance but lightweight with the...

Size 0 20mm Plain Bearing Pulley Block Stand Up BlockThe Barton Size 0 Plain bearing block has 20mm (3/4″) sheaves and is also available in ball bearing sheaves. They are designed for high strength and performance but lightweight with the range starting...

Size 0 20mm Plain Bearing Pulley Block CheekThe Barton Size 0 Plain bearing block has 20mm (3/4″) sheaves and is also available in ball bearing sheaves. They are designed for high strength and performance but lightweight with the range starting at only...

Size 0 20mm Plain Bearing Pulley Block Single Swivel & BecketThe Barton Size 0 Plain bearing block has 20mm (3/4″) sheaves and is also available in ball bearing sheaves. They are designed for high strength and performance but lightweight with the range...

Size 0 20mm Plain Bearing Pulley Block Single SwivelThe Barton Size 0 Plain bearing block has 20mm (3/4″) sheaves and is also available in ball bearing sheaves. Designed for high strength and performance but lightweight with the range starting at only...

Size 0 20mm Plain Bearing Pulley Block Single Fixed Eye & BecketThe Barton Size 0 Plain bearing block has 20mm (3/4″) sheaves and is also available in ball bearing sheaves. Designed for high strength and performance but lightweight with the range...

Stanchion BullseyeBarton's Stanchion Mount Bullseye is ideal for use with furling lines in place of a block. The simple-to-fit mount features a large nylon bullseye with a 17 mm opening. Manufacturer : Barton Marine Manufacturer Part No : 60142 UPC :...

Size 3 45mm Plain Bearing Pulley Block Cheek BlockThe size 3 Barton plain bearing blocks have a 45mm (1 3/4" sheave size 3 block range that incorporates modern design with stainless steel frames and the latest advanced materials, using 30% fiber...

20 Self-Tailing Radial Chrome WinchThe Radial winch drum's gripping surface is shaped for each winch size and drum material and features diagonal ribs (rather than textured abrasive materials) to maximize gripping power and greatly reduce line wear. The...

15 Self-Tailing Radial Aluminum WinchThe Radial winch drum's gripping surface is shaped for each winch size and drum material and features diagonal ribs (rather than textured abrasive materials) to maximize gripping power and greatly reduce line wear...

Clevis Pin - 4.7mm (3/16") x 19mm (3/4")Grade 316 Stainless Steel Manufacturer : Ronstan Manufacturer Part No : RF261 UPC : 9316800027439

Quick Cleat - 1/4" - PairThe Barton Marine Quick Cleat range is perfect for novices and seasoned mariners and takes the place of tying and releasing knots. Made of nylon reinforced composite and secures braided lines up to 1/4" (6 mm) with a working load...

Quick Cleat - Stainless Steel - 3/8"The Barton Marine Quick Cleat range is perfect for novices and seasoned mariners and takes the place of tying and releasing knots.  The heavy-duty version is made of 316-grade Stainless Steel and is suited for marina...

Quick Cleat - On a Patch for Inflatables - 1/4"The Barton Marine Quick Cleat range is perfect for novices and seasoned mariners and takes the place of tying and releasing knots. The perfect solution for securing ropes onto inflatables, featuring a Quick...

Rubber Spreader Boot - Pair - Small - WhiteFeatures:White Rubber Spreader BootSmall Spreader Insert: 1/2" - 1-1/2"Stay Insert: 1/8" Length: 1-5/8"Height: 2" Manufacturer : Whitecap Manufacturer Part No : S-9202P UPC : 725060920210

Rubber Spreader Boot - Pair - Medium - WhiteFeatures:White Rubber Spreader BootMedium Spread Insert: 1" - 2"Stay Insert: 3/16"Length: 2-3/8"Height: 5-3/4" Manufacturer : Whitecap Manufacturer Part No : S-9201P UPC : 725060920111

Rubber Spreader Boot - Pair - Large - WhiteFeatures:White Rubber Spreader BootLarge Spreader Insert: 2" - 3"Stay Insert: 3/16"Length: 2-7/8"Height: 7-1/2" Manufacturer : Whitecap Manufacturer Part No : S-9200P UPC : 725060920012

40mm Carbo Air Block with Cam Cleat & BecketLow-friction Carbo Air blocks are lightweight, strong, reliable—and affordable. Companions to the popular Harken Black Magic block line, these small, compact blocks have very high working loads for safe, easy...

40mm Carbo Air Block with Cam CleatLow-friction Carbo Air blocks are lightweight, strong, reliable—and affordable. Companions to the popular Harken Black Magic block line, these small, compact blocks have very high working loads for safe, easy trimming...